CONFIG_ARC_FIRQ¶

FIRQ enable

Type: bool

Help¶

Fast interrupts are supported (FIRQ). If FIRQ enabled, for interrupts with highest priority, status32 and pc will be saved in aux regs, other regs will be saved according to the number of register bank; If FIRQ is disabled, the handle of interrupts with highest priority will be same with other interrupts.

Direct dependencies¶

SOC_ARC_HSDK || SOC_ARC_IOT || (SOC_EMSDP_EM4 && SOC_ARC_EMSDP) || (SOC_EMSDP_EM5D && SOC_ARC_EMSDP) || (SOC_EMSDP_EM6 && SOC_ARC_EMSDP) || (SOC_EMSDP_EM7D && SOC_ARC_EMSDP) || (SOC_EMSDP_EM7D_ESP && SOC_ARC_EMSDP) || (SOC_EMSDP_EM9D && SOC_ARC_EMSDP) || (SOC_EMSDP_EM11D && SOC_ARC_EMSDP) || (SOC_EMSK_EM7D && SOC_EMSK) || (SOC_NSIM_EM && SOC_NSIM) || (SOC_NSIM_EM7D_V22 && SOC_NSIM) || (SOC_NSIM_SEM && SOC_NSIM) || (SOC_NSIM_HS && SOC_NSIM) || (SOC_NSIM_HS_SMP && SOC_NSIM) || SOC_QEMU_ARC || ARC

(Includes any dependencies from ifs and menus.)

Defaults¶

y
y
y
y
y
y
n
y
y
n if BOARD_EM_STARTERKIT_R23
y if BOARD_EM_STARTERKIT_R22
y
y
n
y
y
n
y

Kconfig definitions¶

At <Zephyr>/soc/arc/snps_arc_hsdk/Kconfig.defconfig:24

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_ARC_HSDK

At <Zephyr>/soc/arc/snps_arc_iot/Kconfig.defconfig:34

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_ARC_IOT

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em4:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:14

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM4 && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em5d:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:15

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM5D && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em6:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:16

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM6 && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em7d:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:17

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM7D && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em7d_esp:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:18

Menu path: (Top)

config ARC_FIRQ
    bool
    default n
    depends on SOC_EMSDP_EM7D_ESP && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em9d:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:19

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM9D && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig.em11d:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsdp/Kconfig.defconfig:20

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_EMSDP_EM11D && SOC_ARC_EMSDP

At <Zephyr>/soc/arc/snps_emsk/Kconfig.defconfig.em7d:34

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_emsk/Kconfig.defconfig:10

Menu path: (Top)

config ARC_FIRQ
    bool
    default n if BOARD_EM_STARTERKIT_R23
    default y if BOARD_EM_STARTERKIT_R22
    depends on SOC_EMSK_EM7D && SOC_EMSK

At <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig.em:30

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig:15

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_NSIM_EM && SOC_NSIM

At <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig.em7d_v22:30

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig:16

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_NSIM_EM7D_V22 && SOC_NSIM

At <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig.sem:30

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig:17

Menu path: (Top)

config ARC_FIRQ
    bool
    default n
    depends on SOC_NSIM_SEM && SOC_NSIM

At <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig.hs:24

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig:18

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_NSIM_HS && SOC_NSIM

At <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig.hs_smp:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arc/snps_nsim/Kconfig.defconfig:19

Menu path: (Top)

config ARC_FIRQ
    bool
    default y
    depends on SOC_NSIM_HS_SMP && SOC_NSIM

At <Zephyr>/soc/arc/snps_qemu/Kconfig.defconfig:21

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config ARC_FIRQ
    bool
    default n
    depends on SOC_QEMU_ARC

At <Zephyr>/arch/arc/Kconfig:107

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:29 → <Zephyr>/arch/Kconfig:12

Menu path: (Top) → ARC Options → ARCv2 Family Options

config ARC_FIRQ
    bool "FIRQ enable"
    default y
    depends on ARC
    help
      Fast interrupts are supported (FIRQ). If FIRQ enabled, for interrupts
      with highest priority, status32 and pc will be saved in aux regs,
      other regs will be saved according to the number of register bank;
      If FIRQ is disabled, the handle of interrupts with highest priority
      will be same with other interrupts.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)