CONFIG_UART_NS16550_PORT_0

Enable NS16550 Port 0

Type: bool

Help

This tells the driver to configure the UART port at boot, depending on the additional configure options below.

Defaults

Kconfig definitions

At boards/arc/emsdp/Kconfig.defconfig:38

Included via Kconfig:8Kconfig.zephyr:26

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_CONSOLE && BOARD_EMSDP

At boards/arm/mec2016evb_assy6797/Kconfig.defconfig:11

Included via Kconfig:8Kconfig.zephyr:26

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y if UART_CONSOLE
    depends on UART_NS16550 && BOARD_MEC2016EVB_ASSY6797

At boards/x86/gpmrb/Kconfig.defconfig:17

Included via Kconfig:8Kconfig.zephyr:26

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && BOARD_GPMRB

At boards/x86/up_squared/Kconfig.defconfig:13

Included via Kconfig:8Kconfig.zephyr:26

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && BOARD_UP_SQUARED

At boards/xtensa/intel_s1000_crb/Kconfig.defconfig:96

Included via Kconfig:8Kconfig.zephyr:26

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && BOARD_INTEL_S1000_CRB

At soc/arc/snps_arc_hsdk/Kconfig.defconfig:55

Included via Kconfig:8Kconfig.zephyr:28

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_CONSOLE && SOC_ARC_HSDK

At soc/arc/snps_arc_iot/Kconfig.defconfig:46

Included via Kconfig:8Kconfig.zephyr:28

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_CONSOLE && SOC_ARC_IOT

At soc/nios2/nios2f-zephyr/Kconfig.defconfig:37

Included via Kconfig:8Kconfig.zephyr:28

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && SOC_NIOS2F_ZEPHYR

At soc/x86/atom/Kconfig.defconfig:20

Included via Kconfig:8Kconfig.zephyr:28

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && SOC_ATOM

At soc/x86/ia32/Kconfig.defconfig:20

Included via Kconfig:8Kconfig.zephyr:28

Menu path: (Top)

config UART_NS16550_PORT_0
    bool
    default y
    depends on UART_NS16550 && SOC_IA32

At drivers/serial/Kconfig.ns16550:45

Included via Kconfig:8Kconfig.zephyr:40drivers/Kconfig:20drivers/serial/Kconfig:67

Menu path: (Top) → Device Drivers → Serial Drivers → NS16550 serial driver

menuconfig UART_NS16550_PORT_0
    bool "Enable NS16550 Port 0"
    depends on UART_NS16550 && SERIAL
    help
      This tells the driver to configure the UART port at boot, depending on
      the additional configure options below.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)