CONFIG_UART_MCUX_FLEXCOMM

MCUX FLEXCOMM UART driver

Type: bool

Help

Enable the MCUX USART driver.

Direct dependencies

(SERIAL && SOC_LPC54114_M0 && SOC_SERIES_LPC54XXX) || (SERIAL && SOC_LPC54114_M4 && SOC_SERIES_LPC54XXX) || (SERIAL && SOC_LPC55S69_CPU0 && SOC_SERIES_LPC55XXX) || (SERIAL && SOC_LPC55S69_CPU1 && SOC_SERIES_LPC55XXX) || (HAS_MCUX_FLEXCOMM && SERIAL)

(Includes any dependencies from ifs and menus.)

Defaults

  • n

  • y

  • y

  • n

Symbols selected by this symbol

Kconfig definitions

At soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m0:30

Included via Kconfig:8Kconfig.zephyr:28soc/arm/nxp_lpc/Kconfig.defconfig:4soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_MCUX_FLEXCOMM
    bool
    default n
    depends on SERIAL && SOC_LPC54114_M0 && SOC_SERIES_LPC54XXX

At soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m4:27

Included via Kconfig:8Kconfig.zephyr:28soc/arm/nxp_lpc/Kconfig.defconfig:4soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_MCUX_FLEXCOMM
    bool
    default y
    depends on SERIAL && SOC_LPC54114_M4 && SOC_SERIES_LPC54XXX

At soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu0:27

Included via Kconfig:8Kconfig.zephyr:28soc/arm/nxp_lpc/Kconfig.defconfig:4soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_MCUX_FLEXCOMM
    bool
    default y
    depends on SERIAL && SOC_LPC55S69_CPU0 && SOC_SERIES_LPC55XXX

At soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu1:30

Included via Kconfig:8Kconfig.zephyr:28soc/arm/nxp_lpc/Kconfig.defconfig:4soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config UART_MCUX_FLEXCOMM
    bool
    default n
    depends on SERIAL && SOC_LPC55S69_CPU1 && SOC_SERIES_LPC55XXX

At drivers/serial/Kconfig.mcux_flexcomm:6

Included via Kconfig:8Kconfig.zephyr:40drivers/Kconfig:20drivers/serial/Kconfig:71

Menu path: (Top) → Device Drivers → Serial Drivers

menuconfig UART_MCUX_FLEXCOMM
    bool "MCUX FLEXCOMM UART driver"
    select SERIAL_HAS_DRIVER
    select SERIAL_SUPPORT_INTERRUPT
    depends on HAS_MCUX_FLEXCOMM && SERIAL
    help
      Enable the MCUX USART driver.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)