CONFIG_UART_GECKO

Gecko UART/USART driver

Type: bool

Help

Enable the Gecko uart driver.

Direct dependencies

(SERIAL && SOC_SERIES_EFM32GG11B) || (SERIAL && SOC_SERIES_EFM32HG) || (SERIAL && SOC_SERIES_EFM32JG12B) || (SERIAL && SOC_SERIES_EFM32PG12B) || (SERIAL && SOC_SERIES_EFM32WG) || (SERIAL && SOC_SERIES_EFR32FG1P) || (SERIAL && SOC_SERIES_EFR32MG12P) || (HAS_SILABS_GECKO && GPIO_GECKO && SERIAL)

(Includes any dependencies from ifs and menus.)

Defaults

  • y

  • y

  • y

  • y

  • y

  • y

  • y

Kconfig definitions

At soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:19

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFM32GG11B

At soc/arm/silabs_exx32/efm32hg/Kconfig.defconfig.efm32hg:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efm32hg/Kconfig.defconfig.series:19

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFM32HG

At soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFM32JG12B

At soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFM32PG12B

At soc/arm/silabs_exx32/efm32wg/Kconfig.defconfig.efm32wg:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efm32wg/Kconfig.defconfig.series:18

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFM32WG

At soc/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.efr32fg1p:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.series:18

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFR32FG1P

At soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:15

Included via Kconfig:8Kconfig.zephyr:28soc/arm/silabs_exx32/Kconfig.defconfig:3soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18

Menu path: (Top)

config UART_GECKO
    bool
    default y
    depends on SERIAL && SOC_SERIES_EFR32MG12P

At drivers/serial/Kconfig.gecko:6

Included via Kconfig:8Kconfig.zephyr:40drivers/Kconfig:20drivers/serial/Kconfig:107

Menu path: (Top) → Device Drivers → Serial Drivers

config UART_GECKO
    bool "Gecko UART/USART driver"
    select SERIAL_HAS_DRIVER
    select SERIAL_SUPPORT_INTERRUPT
    select SOC_GECKO_USART
    depends on HAS_SILABS_GECKO && GPIO_GECKO && SERIAL
    help
      Enable the Gecko uart driver.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)