CONFIG_LIS2DW12_PULSE_QUIET

Quiet value

Type: hex

Help

Expected quiet time after a tap detection: this register represents the time after the first detected tap in which there must not be any overthreshold event. Where 0 equals 2*1/ODR and 1LSB = 4*1/ODR.

Direct dependencies

LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR

(Includes any dependencies from ifs and menus.)

Default

  • 0x00

Kconfig definition

At drivers/sensor/lis2dw12/Kconfig:146

Included via Kconfig:8Kconfig.zephyr:40drivers/Kconfig:56drivers/sensor/Kconfig:88

Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection

config LIS2DW12_PULSE_QUIET
    hex "Quiet value"
    range 0 0x03
    default 0x00
    depends on LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
    help
      Expected quiet time after a tap detection: this register represents
      the time after the first detected tap in which there must not be
      any overthreshold event. Where 0 equals 2*1/ODR and 1LSB = 4*1/ODR.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)