:orphan:

.. title:: UART_1

.. option:: CONFIG_UART_1

*Enable STM32 USART1 Port*

Type: ``bool``

Help
====

Enable support for USART1 port in the driver.
Say y here if you want to use USART1 device.

Direct dependencies
===================

(\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_ARGONKEY <CONFIG_BOARD_96B_ARGONKEY>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_CARBON <CONFIG_BOARD_96B_CARBON>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_NEONKEY <CONFIG_BOARD_96B_NEONKEY>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_WISTRIO <CONFIG_BOARD_96B_WISTRIO>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_B_L072Z_LRWAN1 <CONFIG_BOARD_B_L072Z_LRWAN1>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_DISCO_L475_IOT1 <CONFIG_BOARD_DISCO_L475_IOT1>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_DRAGINO_LSN50 <CONFIG_BOARD_DRAGINO_LSN50>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_GOOGLE_KUKUI <CONFIG_BOARD_GOOGLE_KUKUI>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_NUCLEO_WB55RG <CONFIG_BOARD_NUCLEO_WB55RG>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_OLIMEX_STM32_E407 <CONFIG_BOARD_OLIMEX_STM32_E407>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_OLIMEXINO_STM32 <CONFIG_BOARD_OLIMEXINO_STM32>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_SENSORTILE_BOX <CONFIG_BOARD_SENSORTILE_BOX>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STEVAL_FCU001V1 <CONFIG_BOARD_STEVAL_FCU001V1>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && (\ :option:`BOARD_STM32_MIN_DEV_BLUE <CONFIG_BOARD_STM32_MIN_DEV_BLUE>` || \ :option:`BOARD_STM32_MIN_DEV_BLACK <CONFIG_BOARD_STM32_MIN_DEV_BLACK>`)) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F030_DEMO <CONFIG_BOARD_STM32F030_DEMO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F072B_DISCO <CONFIG_BOARD_STM32F072B_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F0_DISCO <CONFIG_BOARD_STM32F0_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F3_DISCO <CONFIG_BOARD_STM32F3_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F429I_DISC1 <CONFIG_BOARD_STM32F429I_DISC1>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F746G_DISCO <CONFIG_BOARD_STM32F746G_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F769I_DISCO <CONFIG_BOARD_STM32F769I_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32G0316_DISCO <CONFIG_BOARD_STM32G0316_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && (\ :option:`BOARD_STM32H747I_DISCO_M7 <CONFIG_BOARD_STM32H747I_DISCO_M7>` || \ :option:`BOARD_STM32H747I_DISCO_M4 <CONFIG_BOARD_STM32H747I_DISCO_M4>`)) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32L1_DISCO <CONFIG_BOARD_STM32L1_DISCO>`) || (\ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32VL_DISCO <CONFIG_BOARD_STM32VL_DISCO>`) || (\ :option:`UART_STM32 <CONFIG_UART_STM32>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y if \ :option:`BOARD_STM32H747I_DISCO_M7 <CONFIG_BOARD_STM32H747I_DISCO_M7>`
- y
- y

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/96b_argonkey/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_ARGONKEY <CONFIG_BOARD_96B_ARGONKEY>`

----

At ``boards/arm/96b_carbon/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_CARBON <CONFIG_BOARD_96B_CARBON>`

----

At ``boards/arm/96b_neonkey/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_NEONKEY <CONFIG_BOARD_96B_NEONKEY>`

----

At ``boards/arm/96b_wistrio/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_96B_WISTRIO <CONFIG_BOARD_96B_WISTRIO>`

----

At ``boards/arm/b_l072z_lrwan1/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_B_L072Z_LRWAN1 <CONFIG_BOARD_B_L072Z_LRWAN1>`

----

At ``boards/arm/disco_l475_iot1/Kconfig.defconfig:22``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_DISCO_L475_IOT1 <CONFIG_BOARD_DISCO_L475_IOT1>`

----

At ``boards/arm/dragino_lsn50/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_DRAGINO_LSN50 <CONFIG_BOARD_DRAGINO_LSN50>`

----

At ``boards/arm/google_kukui/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_GOOGLE_KUKUI <CONFIG_BOARD_GOOGLE_KUKUI>`

----

At ``boards/arm/nucleo_wb55rg/Kconfig.defconfig:25``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_NUCLEO_WB55RG <CONFIG_BOARD_NUCLEO_WB55RG>`

----

At ``boards/arm/olimex_stm32_e407/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_OLIMEX_STM32_E407 <CONFIG_BOARD_OLIMEX_STM32_E407>`

----

At ``boards/arm/olimexino_stm32/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_OLIMEXINO_STM32 <CONFIG_BOARD_OLIMEXINO_STM32>`

----

At ``boards/arm/sensortile_box/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_SENSORTILE_BOX <CONFIG_BOARD_SENSORTILE_BOX>`

----

At ``boards/arm/steval_fcu001v1/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STEVAL_FCU001V1 <CONFIG_BOARD_STEVAL_FCU001V1>`

----

At ``boards/arm/stm32_min_dev/Kconfig.defconfig:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && (\ :option:`BOARD_STM32_MIN_DEV_BLUE <CONFIG_BOARD_STM32_MIN_DEV_BLUE>` || \ :option:`BOARD_STM32_MIN_DEV_BLACK <CONFIG_BOARD_STM32_MIN_DEV_BLACK>`)

----

At ``boards/arm/stm32f030_demo/Kconfig.defconfig:11``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F030_DEMO <CONFIG_BOARD_STM32F030_DEMO>`

----

At ``boards/arm/stm32f072b_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F072B_DISCO <CONFIG_BOARD_STM32F072B_DISCO>`

----

At ``boards/arm/stm32f0_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F0_DISCO <CONFIG_BOARD_STM32F0_DISCO>`

----

At ``boards/arm/stm32f3_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F3_DISCO <CONFIG_BOARD_STM32F3_DISCO>`

----

At ``boards/arm/stm32f429i_disc1/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F429I_DISC1 <CONFIG_BOARD_STM32F429I_DISC1>`

----

At ``boards/arm/stm32f746g_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F746G_DISCO <CONFIG_BOARD_STM32F746G_DISCO>`

----

At ``boards/arm/stm32f769i_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32F769I_DISCO <CONFIG_BOARD_STM32F769I_DISCO>`

----

At ``boards/arm/stm32g0316_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32G0316_DISCO <CONFIG_BOARD_STM32G0316_DISCO>`

----

At ``boards/arm/stm32h747i_disco/Kconfig.defconfig:53``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y if \ :option:`BOARD_STM32H747I_DISCO_M7 <CONFIG_BOARD_STM32H747I_DISCO_M7>`
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && (\ :option:`BOARD_STM32H747I_DISCO_M7 <CONFIG_BOARD_STM32H747I_DISCO_M7>` || \ :option:`BOARD_STM32H747I_DISCO_M4 <CONFIG_BOARD_STM32H747I_DISCO_M4>`)

----

At ``boards/arm/stm32l1_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32L1_DISCO <CONFIG_BOARD_STM32L1_DISCO>`

----

At ``boards/arm/stm32vl_disco/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config UART_1
    	bool
    	default y
    	depends on \ :option:`UART_CONSOLE <CONFIG_UART_CONSOLE>` && \ :option:`BOARD_STM32VL_DISCO <CONFIG_BOARD_STM32VL_DISCO>`

----

At ``drivers/serial/Kconfig.stm32:20``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:40`` → ``drivers/Kconfig:20`` → ``drivers/serial/Kconfig:91``

Menu path: (Top) → Device Drivers → Serial Drivers → STM32 MCU serial driver

.. parsed-literal::

    config UART_1
    	bool "Enable STM32 USART1 Port"
    	depends on \ :option:`UART_STM32 <CONFIG_UART_STM32>` && \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  Enable support for USART1 port in the driver.
    	  Say y here if you want to use USART1 device.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*