:orphan:

.. title:: LEUART_GECKO

.. option:: CONFIG_LEUART_GECKO

*Gecko leuart driver*

Type: ``bool``

Help
====

Enable the Gecko leuart driver.

Direct dependencies
===================

(\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>`) || (\ :option:`HAS_SILABS_GECKO <CONFIG_HAS_SILABS_GECKO>` && \ :option:`GPIO_GECKO <CONFIG_GPIO_GECKO>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y

Symbols selected by this symbol
===============================

- \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
- \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
- \ :option:`SOC_GECKO_LEUART <CONFIG_SOC_GECKO_LEUART>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:18``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:3`` → ``soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:19``

Menu path: (Top)

.. parsed-literal::

    config LEUART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>`

----

At ``soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:18``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:3`` → ``soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config LEUART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>`

----

At ``soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:18``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:3`` → ``soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config LEUART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>`

----

At ``soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:18``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:3`` → ``soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config LEUART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>`

----

At ``drivers/serial/Kconfig.leuart_gecko:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:40`` → ``drivers/Kconfig:20`` → ``drivers/serial/Kconfig:109``

Menu path: (Top) → Device Drivers → Serial Drivers

.. parsed-literal::

    config LEUART_GECKO
    	bool "Gecko leuart driver"
    	select \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
    	select \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
    	select \ :option:`SOC_GECKO_LEUART <CONFIG_SOC_GECKO_LEUART>`
    	depends on \ :option:`HAS_SILABS_GECKO <CONFIG_HAS_SILABS_GECKO>` && \ :option:`GPIO_GECKO <CONFIG_GPIO_GECKO>` && \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  Enable the Gecko leuart driver.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*