:orphan:

.. title:: GPIO_MCUX_LPC_PORT0

.. option:: CONFIG_GPIO_MCUX_LPC_PORT0

*Port 0*

Type: ``bool``

Help
====

Enable Port 0.

Direct dependencies
===================

(\ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && (\ :option:`BOARD_LPCXPRESSO54114_M4 <CONFIG_BOARD_LPCXPRESSO54114_M4>` || \ :option:`BOARD_LPCXPRESSO54114_M0 <CONFIG_BOARD_LPCXPRESSO54114_M0>`)) || (\ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && (\ :option:`BOARD_LPCXPRESSO55S69_CPU0 <CONFIG_BOARD_LPCXPRESSO55S69_CPU0>` || \ :option:`BOARD_LPCXPRESSO55S69_CPU1 <CONFIG_BOARD_LPCXPRESSO55S69_CPU1>`)) || (\ :option:`PINMUX_MCUX_LPC_PORT0 <CONFIG_PINMUX_MCUX_LPC_PORT0>` && \ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && \ :option:`GPIO <CONFIG_GPIO>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/lpcxpresso54114/Kconfig.defconfig:31``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config GPIO_MCUX_LPC_PORT0
    	bool
    	default y
    	depends on \ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && (\ :option:`BOARD_LPCXPRESSO54114_M4 <CONFIG_BOARD_LPCXPRESSO54114_M4>` || \ :option:`BOARD_LPCXPRESSO54114_M0 <CONFIG_BOARD_LPCXPRESSO54114_M0>`)

----

At ``boards/arm/lpcxpresso55s69/Kconfig.defconfig:31``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:26``

Menu path: (Top)

.. parsed-literal::

    config GPIO_MCUX_LPC_PORT0
    	bool
    	default y
    	depends on \ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && (\ :option:`BOARD_LPCXPRESSO55S69_CPU0 <CONFIG_BOARD_LPCXPRESSO55S69_CPU0>` || \ :option:`BOARD_LPCXPRESSO55S69_CPU1 <CONFIG_BOARD_LPCXPRESSO55S69_CPU1>`)

----

At ``drivers/gpio/Kconfig.mcux_lpc:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:40`` → ``drivers/Kconfig:30`` → ``drivers/gpio/Kconfig:30``

Menu path: (Top) → Device Drivers → GPIO Drivers → MCUX LPC GPIO driver

.. parsed-literal::

    config GPIO_MCUX_LPC_PORT0
    	bool "Port 0"
    	depends on \ :option:`PINMUX_MCUX_LPC_PORT0 <CONFIG_PINMUX_MCUX_LPC_PORT0>` && \ :option:`GPIO_MCUX_LPC <CONFIG_GPIO_MCUX_LPC>` && \ :option:`GPIO <CONFIG_GPIO>`
    	help
    	  Enable Port 0.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*