Nordic UART Service (NUS) shell transport¶
The BLE GATT Nordic UART Service shell transport allows to receive shell commands remotely over Bluetooth. It uses the Nordic UART Service (NUS).
The NUS Service shell transport is used in the Bluetooth: NUS shell transport sample.
Enable NUS shell transport in your application to be able to receive shell commands remotely.
To send shell commands to an application that uses this module, you need specific software, comparable to a terminal (for example, PuTTY) for UART communication.
Sending shell commands¶
The nRF Connect SDK provides two alternatives for sending shell commands from a host (for example, a PC) to the application that uses this module. bt_nus_shell.py is a Python script that requires a terminal and a second development board. BLE Console is a stand-alone application for Linux.
The script file
scripts/shell/bt_nus_shell.py contains a cross-platform example host application, written in Python 2.
The script uses an additional Nordic Development Kit (for example, PCA10040) as a Bluetooth central device. It connects to the specified device and forwards all NUS traffic to the network port. You can then use a terminal application, for example PuTTY, to connect to that port (the default port is 8889) and use the shell.
The script requires the following parameters:
com- port of the development board used by the script
snr- SEGGER board ID
family- chip family of the development board (for example, NRF52)
name- advertising name of the device with the NUS shell
The script does not support reconnection. Therefore, you must restart both the script and the terminal application after each reconnection.
Perform the following steps to use the
Connect a Nordic Development Kit (for example, PCA10040) to your PC.
bt_nus_shell.pyscript with the correct parameters, for example:
bt_nus_shell.py --snr 680834186 --name BT_NUS_shell --com COM115 --family NRF52
Open a terminal, for example PuTTY. Set the Connection Type to
Rawand the Destination Address to
Press Enter in the terminal. A console prompt is displayed.
Enter the commands that you want to execute on the remote shell.
The BLE Console is a stand-alone Linux application that uses a standard Bluetooth device (HCI dongle or built-in Bluetooth device) and the BlueZ stack to communicate over Bluetooth with the device that runs the NUS shell transport.
See BLE Console for more information.
Nordic UART Service (NUS) shell transport API.
SHELL_BT_NUS_DEFINE(_name, _tx_ringbuf_size, _rx_ringbuf_size)¶
Macro for creating an instance of the module.
Initialize the NUS shell transport instance.
This function initializes a shell thread and the Nordic UART Service.
- Return Value
0: If the operation was successful. Otherwise, a (negative) error code is returned.
shell_bt_nus_enable(struct bt_conn *conn)¶
Enable the NUS shell transport instance.
This function should be called when the connection is established.
conn: Connection handle.
Disable the NUS shell transport instance.
- #include <shell_bt_nus.h>
Instance control block (RW data).
- #include <shell_bt_nus.h>