LPD880x Sample Application¶
This sample application demonstrates basic usage of the lpd880x LED strip driver, for controlling LED strips using LPD8803, LPD8806, and compatible driver chips.
- Ensure your Zephyr board, the 5V power supply, and the LED strip share a common ground.
- Connect the MOSI pin of your board’s SPI master to the data input pin of the first LPD8806 IC in the strip.
- Connect the SCLK pin of your board’s SPI master to the clock input pin of the first LPD8806 IC in the strip.
- Connect the 5V power supply pin to the 5V input of the LED strip.
Building and Running¶
The sample application is located at
in the Zephyr source tree.
Before running the application, configure it as follows.
Configure your board’s SPI master in a configuration file under
boards/in the sample directory.
To provide additional configuration for some particular board, create a
boards/YOUR_BOARD_NAME.conffile in the application directory. It will be merged into the application configuration.
In this file, you must ensure that the SPI peripheral you want to use for this demo is enabled, and that its name is “lpd8806_spi”. See
boards/96b_carbon.conffor an example, and refer to your board’s configuration options to set up your desired SPI master.
Set the number of LEDs in your strip in the application sources. This is determined by the macro
STRIP_NUM_LEDSin the file
src/main.c. The value in the file was chosen to work with one meter of the AdaFruit strip.
Then build and flash the application:
# On Linux/macOS cd $ZEPHYR_BASE/samples/drivers/led_lpd8806 mkdir build && cd build # On Windows cd %ZEPHYR_BASE%\samples\drivers\led_lpd8806 mkdir build & cd build cmake -GNinja -DBOARD=<board> .. ninja flash
Refer to your board’s documentation for alternative
flash instructions if your board doesn’t support the
When you connect to your board’s serial console, you should see the following output:
***** BOOTING ZEPHYR OS v1.9.99 ***** [general] [INF] main: Found SPI device lpd8806_spi [general] [INF] main: Found LED strip device lpd880x_strip [general] [INF] main: Displaying pattern on strip