This sample demonstrates Bluetooth Mesh functionality. It has several standard Mesh models, and supports provisioning over both the Advertising and the GATT Provisioning Bearers (i.e. PB-ADV and PB-GATT). The application also needs a functioning serial console, since that’s used for the Out-of-Band provisioning procedure.
- A board with Bluetooth LE support, or
- QEMU with BlueZ running on the host
Building and Running¶
This sample can be found under samples/bluetooth/mesh in the Zephyr tree.
See bluetooth samples section for details on how to run the sample inside QEMU.
For other boards, build and flash the application as follows:
# On Linux/macOS cd $ZEPHYR_BASE/samples/bluetooth/mesh mkdir build && cd build # On Windows cd %ZEPHYR_BASE%\samples\bluetooth\mesh mkdir build & cd build cmake -GNinja -DBOARD=<board> .. ninja flash
Refer to your board’s documentation for alternative
flash instructions if your board doesn’t support the