CONFIG_SPI

SPI hardware bus support

Type: bool

Help

Enable support for the SPI hardware bus.

Symbols selected by this symbol

Symbols that select this symbol

Kconfig definitions

At boards/arm/96b_carbon/Kconfig.defconfig:55

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if BT && BOARD_96B_CARBON
    depends on BT && BOARD_96B_CARBON

At boards/arm/disco_l475_iot1/Kconfig.defconfig:136

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if BT && BOARD_DISCO_L475_IOT1
    depends on BT && BOARD_DISCO_L475_IOT1

At boards/arm/disco_l475_iot1/Kconfig.defconfig:158

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if WIFI && BOARD_DISCO_L475_IOT1
    depends on WIFI && BOARD_DISCO_L475_IOT1

At boards/x86/galileo/Kconfig.defconfig:20

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if BOARD_GALILEO
    depends on BOARD_GALILEO

At boards/x86/quark_se_c1000_devboard/Kconfig.defconfig:14

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if IEEE802154_CC2520 && BOARD_QUARK_SE_C1000_DEVBOARD
    depends on IEEE802154_CC2520 && BOARD_QUARK_SE_C1000_DEVBOARD

At boards/xtensa/intel_s1000_crb/Kconfig.defconfig:176

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config SPI
    bool
    default "y" if FLASH && BOARD_INTEL_S1000_CRB
    depends on FLASH && BOARD_INTEL_S1000_CRB

At soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk64f12:60

Included via Kconfig:10Kconfig.zephyr:23soc/arm/nxp_kinetis/Kconfig.defconfig:3soc/arm/nxp_kinetis/k6x/Kconfig.defconfig.series:19

Menu path: (top menu)

config SPI
    bool
    default "n" if SOC_MK64F12 && SOC_SERIES_KINETIS_K6X
    depends on SOC_MK64F12 && SOC_SERIES_KINETIS_K6X

At soc/arm/nxp_kinetis/kwx/Kconfig.defconfig.mkw2xd512:65

Included via Kconfig:10Kconfig.zephyr:23soc/arm/nxp_kinetis/Kconfig.defconfig:3soc/arm/nxp_kinetis/kwx/Kconfig.defconfig.series:13

Menu path: (top menu)

config SPI
    bool
    default "y" if (SOC_MKW22D5 || SOC_MKW24D5) && SOC_SERIES_KINETIS_KWX
    depends on (SOC_MKW22D5 || SOC_MKW24D5) && SOC_SERIES_KINETIS_KWX

At drivers/spi/Kconfig:12

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:38

Menu path: (top menu) → Device Drivers

menuconfig SPI
    bool
    prompt "SPI hardware bus support"
    select HAS_DTS_SPI
    help
      Enable support for the SPI hardware bus.

(Definitions include propagated dependencies, including from if’s and menus.)