CONFIG_SOC_NRF52810

(No prompt – not directly user assignable.)

Type: bool

Direct dependencies

SOC_SERIES_NRF52X && SOC_FAMILY_NRF

(Includes any dependencies from if’s and menus.)

Defaults

No defaults. Implicitly defaults to n.

Symbols selected by this symbol

Symbols that select this symbol

Kconfig definition

At soc/arm/nordic_nrf/nrf52/Kconfig.soc:8

Included via Kconfig:10Kconfig.zephyr:27soc/Kconfig:12soc/arm/nordic_nrf/Kconfig:19

Menu path: (top menu) → Hardware Configuration

config SOC_NRF52810
    bool
    select HAS_HW_NRF_BPROT if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_CCM if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_CLOCK if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_COMP if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_ECB if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_EGU0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_EGU1 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_GPIO0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_GPIOTE if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_PDM if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_POWER if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_PPI if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_PWM0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_QDEC if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_RNG if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_RTC0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_RTC1 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SAADC if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SPI0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SPIM0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SPIS0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI1 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI2 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI3 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI4 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_SWI5 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TEMP if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TIMER0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TIMER1 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TIMER2 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TWI0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TWIM0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_TWIS0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_UART0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_UARTE0 if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    select HAS_HW_NRF_WDT if SOC_SERIES_NRF52X && SOC_FAMILY_NRF
    depends on SOC_SERIES_NRF52X && SOC_FAMILY_NRF

(Definitions include propagated dependencies, including from if’s and menus.)