CONFIG_MCG_VDIV0

VCO 0 divider

Type: hex

Help

Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits establish the multiplication factor (M) applied to the reference clock frequency.

Direct dependencies

BOARD_FRDM_K64F || BOARD_FRDM_KL25Z || BOARD_HEXIWEAR_K64 || BOARD_USB_KW24D512 || (HAS_MCG && SOC_FAMILY_KINETIS)

(Includes any dependencies from if’s and menus.)

Kconfig definitions

At boards/arm/frdm_k64f/Kconfig.defconfig:19

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config MCG_VDIV0
    hex
    default 0x18 if BOARD_FRDM_K64F
    depends on BOARD_FRDM_K64F

At boards/arm/frdm_kl25z/Kconfig.defconfig:19

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config MCG_VDIV0
    hex
    default 0x00 if BOARD_FRDM_KL25Z
    depends on BOARD_FRDM_KL25Z

At boards/arm/hexiwear_k64/Kconfig.defconfig:19

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config MCG_VDIV0
    hex
    default 0x06 if BOARD_HEXIWEAR_K64
    depends on BOARD_HEXIWEAR_K64

At boards/arm/usb_kw24d512/Kconfig.defconfig:23

Included via Kconfig:10Kconfig.zephyr:21

Menu path: (top menu)

config MCG_VDIV0
    hex
    default 0x0 if BOARD_USB_KW24D512
    depends on BOARD_USB_KW24D512

At soc/arm/nxp_kinetis/Kconfig:81

Included via Kconfig:10Kconfig.zephyr:27soc/Kconfig:12

Menu path: (top menu) → Hardware Configuration

config MCG_VDIV0
    hex
    prompt "VCO 0 divider" if HAS_MCG && SOC_FAMILY_KINETIS
    range 0 0x1F if HAS_MCG && SOC_FAMILY_KINETIS
    default 0 if HAS_MCG && SOC_FAMILY_KINETIS
    depends on HAS_MCG && SOC_FAMILY_KINETIS
    help
      Selects the amount to divide the VCO output of the PLL. The VDIV 0 bits
      establish the multiplication factor (M) applied to the reference clock
      frequency.

(Definitions include propagated dependencies, including from if’s and menus.)