CONFIG_LP3943_I2C_ADDRESS

LP3943 I2C slave address

Type: hex

Help

Specify the I2C slave address for the LP3943 LED driver. 0x60: ADR0 = 0, ADR1 = 0, ADR2 = 0 0x61: ADR0 = 0, ADR1 = 0, ADR2 = 1 0x62: ADR0 = 0, ADR1 = 1, ADR2 = 0 0x63: ADR0 = 0, ADR1 = 1, ADR2 = 1 0x64: ADR0 = 1, ADR1 = 0, ADR2 = 0 0x65: ADR0 = 1, ADR1 = 0, ADR2 = 1 0x66: ADR0 = 1, ADR1 = 1, ADR2 = 0 0x67: ADR0 = 1, ADR1 = 1, ADR2 = 1

Direct dependencies

!HAS_DTS_I2C && LED

(Includes any dependencies from if’s and menus.)

Defaults

Kconfig definition

At drivers/led/Kconfig.lp3943:25

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:80drivers/led/Kconfig:26

Menu path: (top menu) → Device Drivers → LED drivers

config LP3943_I2C_ADDRESS
    hex
    prompt "LP3943 I2C slave address" if !HAS_DTS_I2C && LED
    range 0x60 0x67 if !HAS_DTS_I2C && LED
    default 0x60 if !HAS_DTS_I2C && LED
    depends on !HAS_DTS_I2C && LED
    help
      Specify the I2C slave address for the LP3943 LED driver.
      0x60: ADR0 = 0, ADR1 = 0, ADR2 = 0
      0x61: ADR0 = 0, ADR1 = 0, ADR2 = 1
      0x62: ADR0 = 0, ADR1 = 1, ADR2 = 0
      0x63: ADR0 = 0, ADR1 = 1, ADR2 = 1
      0x64: ADR0 = 1, ADR1 = 0, ADR2 = 0
      0x65: ADR0 = 1, ADR1 = 0, ADR2 = 1
      0x66: ADR0 = 1, ADR1 = 1, ADR2 = 0
      0x67: ADR0 = 1, ADR1 = 1, ADR2 = 1

(Definitions include propagated dependencies, including from if’s and menus.)