CONFIG_IEEE802154_CC2520_INIT_PRIO

CC2520 initialization priority

Type: int

Help

Set the initialization priority number. Do not mess with it unless you know what you are doing. Beware cc2520 requires gpio and spi to be ready first (and sometime gpio should be the very first as spi might need it too). And of course it has to start before the net stack.

Direct dependencies

IEEE802154_CC2520 && IEEE802154

(Includes any dependencies from if’s and menus.)

Defaults

Kconfig definition

At drivers/ieee802154/Kconfig.cc2520:35

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:14drivers/ieee802154/Kconfig:27

Menu path: (top menu) → Device Drivers → IEEE 802.15.4 drivers options → TI CC2520 Driver support

config IEEE802154_CC2520_INIT_PRIO
    int
    prompt "CC2520 initialization priority" if IEEE802154_CC2520 && IEEE802154
    default 80 if IEEE802154_CC2520 && IEEE802154
    depends on IEEE802154_CC2520 && IEEE802154
    help
      Set the initialization priority number. Do not mess with it unless
      you know what you are doing. Beware cc2520 requires gpio and spi to
      be ready first (and sometime gpio should be the very first as spi
      might need it too). And of course it has to start before the net stack.

(Definitions include propagated dependencies, including from if’s and menus.)