CONFIG_FXOS8700_PULSE_THSZ

Pulse Z-axis threshold

Type: hex

Help

Threshold to start the pulse-event detection procedure on the Z-axis. Threshold values for each axis are unsigned 7-bit numbers with a fixed resolution of 0.063 g/LSB, corresponding to an 8g acceleration full-scale range.

Direct dependencies

FXOS8700_PULSE && FXOS8700_TRIGGER && FXOS8700 && SENSOR

(Includes any dependencies from if’s and menus.)

Defaults

Kconfig definition

At drivers/sensor/fxos8700/Kconfig:151

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:64drivers/sensor/Kconfig:62

Menu path: (top menu) → Device Drivers → Sensor Drivers → FXOS8700 accelerometer/magnetometer driver → Pulse detection

config FXOS8700_PULSE_THSZ
    hex
    prompt "Pulse Z-axis threshold" if FXOS8700_PULSE && FXOS8700_TRIGGER && FXOS8700 && SENSOR
    range 0 0x7f if FXOS8700_PULSE && FXOS8700_TRIGGER && FXOS8700 && SENSOR
    default 0x40 if FXOS8700_PULSE && FXOS8700_TRIGGER && FXOS8700 && SENSOR
    depends on FXOS8700_PULSE && FXOS8700_TRIGGER && FXOS8700 && SENSOR
    help
      Threshold to start the pulse-event detection procedure on the Z-axis.
      Threshold values for each axis are unsigned 7-bit numbers with a
      fixed resolution of 0.063 g/LSB, corresponding to an 8g acceleration
      full-scale range.

(Definitions include propagated dependencies, including from if’s and menus.)