CONFIG_FXOS8700

FXOS8700 accelerometer/magnetometer driver

Type: bool

Help

Enable driver for the FXOS8700 accelerometer/magnetometer. The driver also supports MMA8451Q, MMA8652FC and MMA8653FC accelerometers. If the driver is used with one of these accelerometers then the Accelerometer-only mode should be selected.”

Direct dependencies

I2C && HAS_DTS_I2C && HAS_DTS_GPIO && SENSOR

(Includes any dependencies from if’s and menus.)

Defaults

No defaults. Implicitly defaults to n.

Kconfig definition

At drivers/sensor/fxos8700/Kconfig:8

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:64drivers/sensor/Kconfig:62

Menu path: (top menu) → Device Drivers → Sensor Drivers

menuconfig FXOS8700
    bool
    prompt "FXOS8700 accelerometer/magnetometer driver" if I2C && HAS_DTS_I2C && HAS_DTS_GPIO && SENSOR
    depends on I2C && HAS_DTS_I2C && HAS_DTS_GPIO && SENSOR
    help
      Enable driver for the FXOS8700 accelerometer/magnetometer.
      The driver also supports MMA8451Q, MMA8652FC and MMA8653FC
      accelerometers. If the driver is used with one of these
      accelerometers then the Accelerometer-only mode should be selected."

(Definitions include propagated dependencies, including from if’s and menus.)