CONFIG_CLOCK_STM32_PLL_DIVISOR

PLL divisor

Type: int

Help

PLL divisor, allowed values: 2-4.

Direct dependencies

CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L0X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL

(Includes any dependencies from if’s and menus.)

Kconfig definition

At drivers/clock_control/Kconfig.stm32:314

Included via Kconfig:10Kconfig.zephyr:35drivers/Kconfig:54drivers/clock_control/Kconfig:30

Menu path: (top menu) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

config CLOCK_STM32_PLL_DIVISOR
    int
    prompt "PLL divisor" if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L0X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    range 2 4 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L0X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    default 2 if CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L0X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    depends on CLOCK_STM32_SYSCLK_SRC_PLL && SOC_SERIES_STM32L0X && CLOCK_CONTROL_STM32_CUBE && SOC_FAMILY_STM32 && CLOCK_CONTROL
    help
      PLL divisor, allowed values: 2-4.

(Definitions include propagated dependencies, including from if’s and menus.)