:orphan:

.. title:: GPIO_PCAL9535A_0_I2C_ADDR

.. option:: CONFIG_GPIO_PCAL9535A_0_I2C_ADDR

*PCAL9535A GPIO chip #0 I2C slave address*

Type: ``hex``

Help
====

Specify the I2C slave address for the PCAL9535A I2C-based GPIO chip #0.

Direct dependencies
===================

(\ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>` && \ :option:`I2C <CONFIG_I2C>` && \ :option:`BOARD_GALILEO <CONFIG_BOARD_GALILEO>`) || (\ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>`)

*(Includes any dependencies from if's and menus.)*

Defaults
========

- 0x25 if \ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>` && \ :option:`I2C <CONFIG_I2C>` && \ :option:`BOARD_GALILEO <CONFIG_BOARD_GALILEO>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/x86/galileo/Kconfig.defconfig:43``

Included via ``Kconfig:10`` → ``Kconfig.zephyr:21``

Menu path: (top menu)

.. parsed-literal::

    config GPIO_PCAL9535A_0_I2C_ADDR
    	hex
    	default 0x25 if \ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>` && \ :option:`I2C <CONFIG_I2C>` && \ :option:`BOARD_GALILEO <CONFIG_BOARD_GALILEO>`
    	depends on \ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>` && \ :option:`I2C <CONFIG_I2C>` && \ :option:`BOARD_GALILEO <CONFIG_BOARD_GALILEO>`

----

At ``drivers/gpio/Kconfig.pcal9535a:35``

Included via ``Kconfig:10`` → ``Kconfig.zephyr:35`` → ``drivers/Kconfig:34`` → ``drivers/gpio/Kconfig:27``

Menu path: (top menu) → Device Drivers → GPIO Drivers → PCAL9535A I2C-based GPIO chip → PCAL9535A GPIO chip #0

.. parsed-literal::

    config GPIO_PCAL9535A_0_I2C_ADDR
    	hex
    	prompt "PCAL9535A GPIO chip #0 I2C slave address" if \ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>`
    	depends on \ :option:`GPIO_PCAL9535A_0 <CONFIG_GPIO_PCAL9535A_0>` && \ :option:`GPIO_PCAL9535A <CONFIG_GPIO_PCAL9535A>` && \ :option:`GPIO <CONFIG_GPIO>`
    	help
    	  Specify the I2C slave address for the PCAL9535A I2C-based GPIO chip #0.

*(Definitions include propagated dependencies, including from if's and menus.)*