Bluetooth Mesh

Bluetooth Mesh . More...

Topics
	Access layer
	Access layer .
	Bluetooth Mesh BLOB Transfer Client model API
	Bluetooth Mesh BLOB Transfer Server model API
	Bluetooth Mesh BLOB flash stream
	Bluetooth Mesh BLOB model API
	Bluetooth Mesh Device Firmware Update
	Bluetooth Mesh On-Demand Private GATT Proxy Client
	Bluetooth Mesh On-Demand Private GATT Proxy Server
	Bluetooth Mesh Private Beacon Client
	Bluetooth Mesh Private Beacon Server
	Bluetooth Mesh SAR Configuration Client Model
	Bluetooth Mesh .
	Bluetooth Mesh SAR Configuration Server Model
	Bluetooth Mesh .
	Bluetooth Mesh Solicitation PDU RPL Client
	Bluetooth Mesh Solicitation PDU RPL Server
	Bridge Configuration Client Model
	API for the Bluetooth Mesh Bridge Configuration Client model
	Bridge Configuration Server Model
	API for the Bluetooth Mesh Bridge Configuration Server model
	Bridge Configuration common header
	Configuration Client Model
	Configuration Client Model .
	Configuration Server Model
	Configuration Server Model .
	Firmware Distribution models
	Health Client Model
	Health Client Model .
	Health Server Model
	Health Server Model .
	Health faults
	List of specification defined Health fault values.
	Heartbeat
	Heartbeat .
	Large Composition Data Client model
	Large Composition Data Server model
	Message
	Message .
	Opcodes Aggregator Client model
	Opcodes Aggregator Server model
	Provisioning
	Provisioning .
	Proxy
	Proxy .
	Remote Provisioning Client model
	Remote Provisioning models
	Remote provisioning server
	Runtime Configuration
	Runtime Configuration .
	SAR Configuration common header
	Statistic
	Statistic .

Data Structures
struct	bt_mesh_lpn_cb
	Low Power Node callback functions. More...
struct	bt_mesh_friend_cb
	Friend Node callback functions. More...

Macros
#define	BT_MESH_NET_PRIMARY   0x000
	Primary Network Key index.
#define	BT_MESH_FEAT_RELAY   BIT(0)
	Relay feature.
#define	BT_MESH_FEAT_PROXY   BIT(1)
	GATT Proxy feature.
#define	BT_MESH_FEAT_FRIEND   BIT(2)
	Friend feature.
#define	BT_MESH_FEAT_LOW_POWER   BIT(3)
	Low Power Node feature.
#define	BT_MESH_FEAT_SUPPORTED
	Supported heartbeat publication features.
#define	BT_MESH_LPN_CB_DEFINE(_name)
	Register a callback structure for Friendship events.
#define	BT_MESH_FRIEND_CB_DEFINE(_name)
	Register a callback structure for Friendship events.

Functions
int	bt_mesh_init (const struct bt_mesh_prov *prov, const struct bt_mesh_comp *comp)
	Initialize Mesh support.
void	bt_mesh_reset (void)
	Reset the state of the local Mesh node.
int	bt_mesh_suspend (void)
	Suspend the Mesh network temporarily.
int	bt_mesh_resume (void)
	Resume a suspended Mesh network.
void	bt_mesh_iv_update_test (bool enable)
	Toggle the IV Update test mode.
bool	bt_mesh_iv_update (void)
	Toggle the IV Update state.
int	bt_mesh_lpn_set (bool enable)
	Toggle the Low Power feature of the local device.
int	bt_mesh_lpn_poll (void)
	Send out a Friend Poll message.
int	bt_mesh_friend_terminate (uint16_t lpn_addr)
	Terminate Friendship.
void	bt_mesh_rpl_pending_store (uint16_t addr)
	Store pending RPL entry(ies) in the persistent storage.
const uint8_t *	bt_mesh_va_uuid_get (uint16_t addr, const uint8_t *uuid, uint16_t *retaddr)
	Iterate stored Label UUIDs.

Detailed Description

Bluetooth Mesh .

Macro Definition Documentation

BT_MESH_FEAT_FRIEND

#define BT_MESH_FEAT_FRIEND   BIT(2)

#include <zephyr/bluetooth/mesh/main.h>

Friend feature.

BT_MESH_FEAT_LOW_POWER

#define BT_MESH_FEAT_LOW_POWER   BIT(3)

#include <zephyr/bluetooth/mesh/main.h>

Low Power Node feature.

BT_MESH_FEAT_PROXY

#define BT_MESH_FEAT_PROXY   BIT(1)

#include <zephyr/bluetooth/mesh/main.h>

GATT Proxy feature.

BT_MESH_FEAT_RELAY

#define BT_MESH_FEAT_RELAY   BIT(0)

#include <zephyr/bluetooth/mesh/main.h>

Relay feature.

BT_MESH_FEAT_SUPPORTED

#define BT_MESH_FEAT_SUPPORTED

#include <zephyr/bluetooth/mesh/main.h>

Value:

                                             (BT_MESH_FEAT_RELAY |   \
                                             BT_MESH_FEAT_PROXY |   \
                                             BT_MESH_FEAT_FRIEND |  \
                                             BT_MESH_FEAT_LOW_POWER)

Supported heartbeat publication features.

BT_MESH_FRIEND_CB_DEFINE

#define BT_MESH_FRIEND_CB_DEFINE

(

_name

)

#include <zephyr/bluetooth/mesh/main.h>

Value:

        static const STRUCT_SECTION_ITERABLE(bt_mesh_friend_cb,          \
                                             _CONCAT(bt_mesh_friend_cb_, \
                                                     _name))

Register a callback structure for Friendship events.

Registers a callback structure that will be called whenever Friendship gets established or terminated.

Parameters

_name

Name of callback structure.

BT_MESH_LPN_CB_DEFINE

#define BT_MESH_LPN_CB_DEFINE

(

_name

)

#include <zephyr/bluetooth/mesh/main.h>

Value:

        static const STRUCT_SECTION_ITERABLE(bt_mesh_lpn_cb,          \
                                             _CONCAT(bt_mesh_lpn_cb_, \
                                                     _name))

Register a callback structure for Friendship events.

Parameters

_name

Name of callback structure.

BT_MESH_NET_PRIMARY

#define BT_MESH_NET_PRIMARY   0x000

#include <zephyr/bluetooth/mesh/main.h>

Primary Network Key index.

Function Documentation

bt_mesh_friend_terminate()

int bt_mesh_friend_terminate

(

uint16_t

lpn_addr

)

#include <zephyr/bluetooth/mesh/main.h>

Terminate Friendship.

Terminated Friendship for given LPN.

Parameters

lpn_addr

Low Power Node address.

Returns

Zero on success or (negative) error code otherwise.

bt_mesh_init()

int bt_mesh_init	(	const struct bt_mesh_prov *	prov,
		const struct bt_mesh_comp *	comp )

#include <zephyr/bluetooth/mesh/main.h>

Initialize Mesh support.

After calling this API, the node will not automatically advertise as unprovisioned, rather the bt_mesh_prov_enable() API needs to be called to enable unprovisioned advertising on one or more provisioning bearers.

Parameters

prov	Node provisioning information.
comp	Node Composition.

Returns

Zero on success or (negative) error code otherwise.

bt_mesh_iv_update()

bool bt_mesh_iv_update

(

void

)

#include <zephyr/bluetooth/mesh/main.h>

Toggle the IV Update state.

This API is only available if the IV Update test mode has been enabled in Kconfig. It is needed for passing most of the IV Update qualification test cases.

Returns

true if IV Update In Progress state was entered, false otherwise.

bt_mesh_iv_update_test()

void bt_mesh_iv_update_test

(

bool

enable

)

#include <zephyr/bluetooth/mesh/main.h>

Toggle the IV Update test mode.

This API is only available if the IV Update test mode has been enabled in Kconfig. It is needed for passing most of the IV Update qualification test cases.

Parameters

enable

true to enable IV Update test mode, false to disable it.

bt_mesh_lpn_poll()

int bt_mesh_lpn_poll

(

void

)

#include <zephyr/bluetooth/mesh/main.h>

Send out a Friend Poll message.

Send a Friend Poll message to the Friend of this node. If there is no established Friendship the function will return an error.

Returns

Zero on success or (negative) error code otherwise.

bt_mesh_lpn_set()

int bt_mesh_lpn_set

(

bool

enable

)

#include <zephyr/bluetooth/mesh/main.h>

Toggle the Low Power feature of the local device.

Enables or disables the Low Power feature of the local device. This is exposed as a run-time feature, since the device might want to change this e.g. based on being plugged into a stable power source or running from a battery power source.

Parameters

enable

true to enable LPN functionality, false to disable it.

Returns

Zero on success or (negative) error code otherwise.

bt_mesh_reset()

void bt_mesh_reset

(

void

)

#include <zephyr/bluetooth/mesh/main.h>

Reset the state of the local Mesh node.

Resets the state of the node, which means that it needs to be reprovisioned to become an active node in a Mesh network again.

After calling this API, the node will not automatically advertise as unprovisioned, rather the bt_mesh_prov_enable() API needs to be called to enable unprovisioned advertising on one or more provisioning bearers.

bt_mesh_resume()

int bt_mesh_resume

(

void

)

#include <zephyr/bluetooth/mesh/main.h>

Resume a suspended Mesh network.

This API resumes the local node, after it has been suspended using the bt_mesh_suspend() API.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_rpl_pending_store()

void bt_mesh_rpl_pending_store

(

uint16_t

addr

)

#include <zephyr/bluetooth/mesh/main.h>

Store pending RPL entry(ies) in the persistent storage.

This API allows the user to store pending RPL entry(ies) in the persistent storage without waiting for the timeout.

Note

When flash is used as the persistent storage, calling this API too frequently may wear it out.

Parameters

addr	Address of the node which RPL entry needs to be stored or BT_MESH_ADDR_ALL_NODES to store all pending RPL entries.

bt_mesh_suspend()

int bt_mesh_suspend

(

void

)

#include <zephyr/bluetooth/mesh/main.h>

Suspend the Mesh network temporarily.

This API can be used for power saving purposes, but the user should be aware that leaving the local node suspended for a long period of time may cause it to become permanently disconnected from the Mesh network. If at all possible, the Friendship feature should be used instead, to make the node into a Low Power Node.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_va_uuid_get()

const uint8_t * bt_mesh_va_uuid_get	(	uint16_t	addr,
		const uint8_t *	uuid,
		uint16_t *	retaddr )

#include <zephyr/bluetooth/mesh/main.h>

Iterate stored Label UUIDs.

When addr is BT_MESH_ADDR_UNASSIGNED, this function iterates over all available addresses starting with uuid. In this case, use retaddr to get virtual address representation of the returned Label UUID. When addr is a virtual address, this function returns next Label UUID corresponding to the addr. When uuid is NULL, this function returns the first available UUID. If uuid is previously returned uuid, this function returns following uuid.

Parameters

addr	Virtual address to search for, or BT_MESH_ADDR_UNASSIGNED.
uuid	Pointer to the previously returned Label UUID or NULL.
retaddr	Pointer to a memory where virtual address representation of the returning UUID is to be stored to.

Returns

Pointer to Label UUID, or NULL if no more entries found.