Zephyr API 3.6.99
|
Abstraction for audio codecs. More...
Data Structures | |
union | audio_dai_cfg_t |
Digital Audio Interface Configuration. More... | |
struct | audio_codec_cfg |
Codec configuration parameters. More... | |
union | audio_property_value_t |
Codec property values. More... | |
Typedefs | |
typedef void(* | audio_codec_error_callback_t) (const struct device *dev, uint32_t errors) |
Callback for error interrupt. | |
Functions | |
static int | audio_codec_configure (const struct device *dev, struct audio_codec_cfg *cfg) |
Configure the audio codec. | |
static void | audio_codec_start_output (const struct device *dev) |
Set codec to start output audio playback. | |
static void | audio_codec_stop_output (const struct device *dev) |
Set codec to stop output audio playback. | |
static int | audio_codec_set_property (const struct device *dev, audio_property_t property, audio_channel_t channel, audio_property_value_t val) |
Set a codec property defined by audio_property_t. | |
static int | audio_codec_apply_properties (const struct device *dev) |
Atomically apply any cached properties. | |
static int | audio_codec_clear_errors (const struct device *dev) |
Clear any codec errors. | |
static int | audio_codec_register_error_callback (const struct device *dev, audio_codec_error_callback_t cb) |
Register a callback function for codec error. | |
static int | audio_codec_route_input (const struct device *dev, audio_channel_t channel, uint32_t input) |
Sets up signal routing for a given input channel. | |
static int | audio_codec_route_output (const struct device *dev, audio_channel_t channel, uint32_t output) |
Sets up signal routing for a given output channel. | |
Abstraction for audio codecs.
#include <zephyr/audio/codec.h>
Callback for error interrupt.
dev | Pointer to the codec device |
errors | Device errors (bitmask of audio_codec_error_type values) |
enum audio_channel_t |
#include <zephyr/audio/codec.h>
Audio channel identifiers to use in audio_codec_set_property().
#include <zephyr/audio/codec.h>
Codec error type.
enum audio_dai_type_t |
#include <zephyr/audio/codec.h>
Digital Audio Interface (DAI) type.
enum audio_pcm_rate_t |
#include <zephyr/audio/codec.h>
PCM audio sample rates.
enum audio_pcm_width_t |
#include <zephyr/audio/codec.h>
PCM audio sample bit widths.
Enumerator | |
---|---|
AUDIO_PCM_WIDTH_16_BITS | 16-bit sample width |
AUDIO_PCM_WIDTH_20_BITS | 20-bit sample width |
AUDIO_PCM_WIDTH_24_BITS | 24-bit sample width |
AUDIO_PCM_WIDTH_32_BITS | 32-bit sample width |
enum audio_property_t |
#include <zephyr/audio/codec.h>
Codec properties that can be set by audio_codec_set_property().
Enumerator | |
---|---|
AUDIO_PROPERTY_OUTPUT_VOLUME | Output volume. |
AUDIO_PROPERTY_OUTPUT_MUTE | Output mute/unmute. |
AUDIO_PROPERTY_INPUT_VOLUME | Input volume. |
AUDIO_PROPERTY_INPUT_MUTE | Input mute/unmute. |
enum audio_route_t |
#include <zephyr/audio/codec.h>
Enumerator | |
---|---|
AUDIO_ROUTE_BYPASS | |
AUDIO_ROUTE_PLAYBACK | |
AUDIO_ROUTE_PLAYBACK_CAPTURE | |
AUDIO_ROUTE_CAPTURE |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Atomically apply any cached properties.
Following one or more invocations of audio_codec_set_property, that may have been cached by the driver, audio_codec_apply_properties can be invoked to apply all the properties as atomic as possible
dev | Pointer to the device structure for codec driver instance. |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Clear any codec errors.
Clear all codec errors. If an error interrupt exists, it will be de-asserted.
dev | Pointer to the device structure for codec driver instance. |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Configure the audio codec.
Configure the audio codec device according to the configuration parameters provided as input
dev | Pointer to the device structure for codec driver instance. |
cfg | Pointer to the structure containing the codec configuration. |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Register a callback function for codec error.
The callback will be called from a thread, so I2C or SPI operations are safe. However, the thread's stack is limited and defined by the driver. It is currently up to the caller to ensure that the callback does not overflow the stack.
dev | Pointer to the audio codec device |
cb | The function that should be called when an error is detected fires |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Sets up signal routing for a given input channel.
Some codecs can do input routing (multiplexing) from a chosen set of physical inputs. This function maps a given audio (stream) channel to a given physical input terminal.
dev | Pointer to the audio codec device |
channel | The channel to map |
input | The input terminal index, codec-specific |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Sets up signal routing for a given output channel.
Some codecs can do output routing (multiplexing) from a chosen set of physical output. This function maps a given audio (stream) channel to a given physical output terminal.
dev | Pointer to the audio codec device |
channel | The channel to map |
output | The output terminal index, codec-specific |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Set a codec property defined by audio_property_t.
Set a property such as volume level, clock configuration etc.
dev | Pointer to the device structure for codec driver instance. |
property | The codec property to set |
channel | The audio channel for which the property has to be set |
val | pointer to a property value of type audio_codec_property_value_t |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Set codec to start output audio playback.
Setup the audio codec device to start the audio playback
dev | Pointer to the device structure for codec driver instance. |
|
inlinestatic |
#include <zephyr/audio/codec.h>
Set codec to stop output audio playback.
Setup the audio codec device to stop the audio playback
dev | Pointer to the device structure for codec driver instance. |