nxp,s32-swt
Vendor: NXP Semiconductors
Description
Software Watchdog Timer (SWT)
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
Each bit set on this mask enables access to this watchdog for the platform
bus master corresponding to the bit. The platform bus master assignments
are chip-specific.
Defaults to access enabled for all masters (hardware reset value).
Default value: |
|
|
Set this flag to generate a reset on respond to an invalid access.
|
|
|
Watchdog service mode:
- fixed: writes a fixed sequence as defined by hardware.
- keyed: writes two pseudo-random key values based on an initial key.
Defaults to "fixed" (hardware reset value).
Default value: Legal values: |
|
|
Overrides the initial key when using keyed service mode.
Defaults to 0 (hardware reset value).
|
|
|
Lock mechanism that provides write access protection to the configuration
and service registers:
- unlocked: registers are always writable.
- soft: unlocked by writing an unlock sequence to the service register.
- hard: unlocked only after a reset.
Defaults to unlocked (hardware reset value).
Default value: Legal values: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nxp,s32-swt” compatible.
Name |
Type |
Details |
---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
This property is required. |
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|