nordic,nrf-ipct-local
Vendor: Nordic Semiconductor
Description
Nordic Local IPCT (Interprocessor Communication Transceiver)
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Number of channels implemented by the IPCT instance.
This property is required. |
|
|
Mapping of IPCT channels that are mapped between two IPCT instances on
separate domains, in which a channel on this IPCT node is considered
the source. This array is then comprised of a 3-integer-wide "unit"
that defines one connection of the mapping. The format of this unit
is <source_channel sink_domain_id sink_channel>. Units are sequential
in the array, therefore requiring the length of this property to be
a factor of 3.
For example, if channel 2 is to be mapped to Radio Core (ID: 3) IPCT
channel 4, then the array "unit" would be <2 NRF_DOMAIN_ID_RADIOCORE 4>
or <2 3 4>.
|
|
|
Mapping of IPCT channels that are mapped between two IPCT instances on
separate domains, in which a channel on this IPCT node is considered
the sink. This array is then comprised of a 3-integer-wide "unit"
that defines one connection of the mapping. The format of this unit
is <sink_channel source_domain_id source_channel>. Units are sequential
in the array, therefore requiring the length of this property to be
a factor of 3.
For example, if channel 2 is to be mapped to Radio Core (ID: 3) IPCT
channel 4, then the array "unit" would be <2 NRF_DOMAIN_ID_RADIOCORE 4>
or <2 3 4>.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-ipct-local” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|