infineon,cat1-i2c
Vendor: Infineon Technologies
Description
These nodes are “i2c” bus nodes.
Infineon CAT1 I2C driver
This driver configures the SCB as an I2C device.
Example devicetree configuration with vl53l0x Time-of-Flight (ToF)
ranging sensor connected on the bus:
i2c3: &scb3 {
compatible = "infineon,cat1-i2c";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&p6_0_scb3_i2c_scl &p6_1_scb3_i2c_sda>;
pinctrl-names = "default";
vl53l0x@29 {
compatible = "st,vl53l0x";
reg = <0x29>;
};
};
The pinctrl nodes need to be configured as open-drain and
input-enable:
&p6_0_scb3_i2c_scl {
drive-open-drain;
input-enable;
};
&p6_1_scb3_i2c_sda {
drive-open-drain;
input-enable;
};
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Frequency that the I2C bus runs
|
|
|
Size of the submission queue for blocking requests
Default value: |
|
|
Size of the completion queue for blocking requests
Default value: |
|
|
PORT pin configuration for SCL, SDA signals.
We expect that the phandles will reference pinctrl nodes. These
nodes will have a nodelabel that matches the Infineon SoC Pinctrl
defines and have following
format: p<port>_<pin>_<peripheral inst>_<signal>.
Examples:
pinctrl-0 = <&p6_0_scb3_i2c_scl &p6_1_scb3_i2c_sda>;
This property is required. |
|
|
Pin configuration/s for the second state. See pinctrl-0.
|
|
|
Pin configuration/s for the third state. See pinctrl-0.
|
|
|
Pin configuration/s for the fourth state. See pinctrl-0.
|
|
|
Pin configuration/s for the fifth state. See pinctrl-0.
|
|
|
Names for the provided states. The number of names needs to match the
number of states.
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “infineon,cat1-i2c” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
This property is required. Constant value: |
|
|
number of size cells in reg property
This property is required. |
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|