nordic,nrf-hsfll
Vendor: Nordic Semiconductor
Description
Nordic nRF HSFLL
The HSFLL mixed-mode IP generates several clock frequencies in the range from
64 MHz to 400 MHz (in steps of 16 MHz).
Usage example:
hsfll: clock@deadbeef {
compatible = "nordic,nrf-hsfll";
reg = <0xdeadbeef 0x1000>;
clocks = <&fll16m>;
clock-frequency = <DT_FREQ_M(320)>;
nordic,ficrs = <&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_VSUP>,
<&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_COARSE_0>,
<&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_FINE_0>;
nordic,ficr-names = "vsup", "coarse", "fine";
};
Required FICR entries are for VSUP, COARSE and FINE trim values.
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Number of items to expect in a Clock specifier
This property is required. |
|
|
output clock frequency (Hz)
This property is required. Legal values: |
|
|
FICR entries, e.g. <&ficr OFFSET>. Available offsets (or FICR entries) are
available at <zephyr/dt-bindings/misc/nordic-nrf-ficr-*.h>.
|
|
|
Names of each nordic,ficrs entry.
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-hsfll” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
List of power states that will disable this device power.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
This property is required. |
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Power domain specifiers
|
|
|
Provided names of power domain specifiers
|
|
|
Number of cells in power-domains property
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|