NuMaker-PFM-M2351

Building TF-M

Build TF-M regression test with M2351 by following commands:

$ cd tf-m-test/tests_reg
$ cmake -S spe -B build_spe \
        -G"Unix Makefiles" \
        -DTFM_PLATFORM=nuvoton/m2351 \
        -DTFM_TOOLCHAIN_FILE=[tf-m path]/toolchain_GNUARM.cmake \
        -DCMAKE_BUILD_TYPE=Release \
        -DTEST_S=ON -DTEST_NS=ON
$ cmake --build build --parallel -- install
$ cmake -S . -B build_test \
        -G"Unix Makefiles" \
        -DCONFIG_SPE_PATH=[tf-m-tests path]/tests_reg/build_spe/api_ns \
        -DTFM_TOOLCHAIN_FILE=cmake/toolchain_ns_GNUARM.cmake \
        -DCMAKE_BUILD_TYPE=Release \
$ cmake --build build_test --parallel -- install

Define TEST_NS=ON or TEST_S=ON for non-secure or secure regression test. CMAKE_BUILD_TYPE could be “Release”, “RelWithDebInfo” or “Minsizerel” Other cmake parameters should not be changed.

Flashing Image with Nuvoton NuLink Tool

NuMaker-PFM-M2351 board supports on board ICE called NuLink. Connect NuLink to PC with USB cable and using NuLink Command Tool to flashing the image.

The commands are as follows:

> NuLink_M2351_M261 -C
> NuLink_M2351_M261 -E ALL
> NuLink_M2351_M261 -W NSCBA 0x80000 0
> NuLink_M2351_M261 -S
> NuLink_M2351_M261 -C
> NuLink_M2351_M261 -W APROM .\build_spe\bin\bl2.bin 0
> NuLink_M2351_M261 -W APROM .\build_spe\bin\tfm_s_signed.bin 0 0x20000 0
> NuLink_M2351_M261 -W APROMNS .\build_test\bin\tfm_ns_signed.bin 0