Short-Range Protocols External Radio Coexistence

The radio coexistence feature allows the application to interface with several types of packet traffic arbiters (PTAs). PTAs arbitrate the requested radio operations between all radios to avoid interference, providing better radio performance to devices using multiple interfering radios simultaneously, like a combination of IEEE 802.15.4, Bluetooth® Low Energy (LE), and Wi-Fi. The arbitration algorithm used can vary between PTAs.

Note

The radio coexistence feature is not needed for the arbitration between Bluetooth LE and IEEE 802.15.4 in dynamic multiprotocol applications, as the dynamic multiprotocol does not use PTA for the arbitration.

Overview

The radio coexistence feature allows short-range protocol drivers (e.g. IEEE 802.15.4, Bluetooth LE) to communicate with the packet traffic arbiter (PTA) using MPSL CX API. The MPSL CX API is hardware-agnostic and separates the implementation of the protocol driver from an implementation specific to given PTA. To perform any radio operation, the protocol drivers must first request the appropriate access to the medium from the PTA. The request informs the PTA implementation about which radio operations it wants to perform at that moment or shortly after, and what is the priority of the operation. The radio operation can be executed only when the PTA grants it. When the PTA revokes access to the medium during an ongoing radio operation, the radio protocol must abort this operation immediately. When the radio operation is finished, the protocol driver must release the requested operation.

The implementation of MPSL CX translates the request invoked by radio protocol to hardware signals compatible with the PTA available in the system. It also translates the hardware signals received from the PTA indicating which radio operations are allowed at that moment, and it passes this information to the radio protocol.

Note

To learn more about the arbitration process during various transmission and reception modes for the IEEE 802.15.4 Radio Driver, see Wi-Fi Coexistence module (PTA support)

Selecting CX Implementation

The Multiprotocol Service Layer itself does not provide any implementation of the CX interface. For details on the implementations present in the nRF Connect SDK, see Coexistence of short-range radio and other radios. An application that needs to use CX must call mpsl_cx_interface_set() during the system initialization. The initialization of any resource needed by the selected CX implementation is not in scope of Multiprotocol Service Layer and must also be done during the system initialization.

Note

In the nRF Connect SDK, the selection of a CX implementation and its appropriate initialization is done automatically, using Kconfig and Device Tree configuration options. Please refer to Coexistence of short-range radio and other radios.

Using CX API in a protocol driver

To use the CX API in a protocol driver, you must follow the MPSL CX API defined by nrfxlib/mpsl/include/protocol/mpsl_cx_protocol_api.h.

Implementing CX API

For details on the implementations of the MPSL CX API for certain PTAs already supported by the nRF Connect SDK, see Coexistence of short-range radio and other radios. If your PTA is not supported yet, see Custom coexistence implementations for guidelines on how to add your own implementation.