sdc_hci_cmd_vs_scan_accept_ext_adv_packets_set()

uint8_t sdc_hci_cmd_vs_scan_accept_ext_adv_packets_set

(

const sdc_hci_cmd_vs_scan_accept_ext_adv_packets_set_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_vs.h>

Scan accept extended advertising packets set.

This command enables or disables reception of extended advertising packets when extended scanner or extended initiator HCI commands are used.

When reception of extended advertising packets is disabled, the scanner may be able to receive more legacy advertising packets. Reception of extended advertising packets should only be disabled when the application knows it is not interested in reports from extended advertisers.

After HCI Reset, reception of extended advertising packets is enabled.

Event(s) generated (unless masked away): When the command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.