sdc_hci_cmd_vs_allow_parallel_connection_establishments()

uint8_t sdc_hci_cmd_vs_allow_parallel_connection_establishments

(

const sdc_hci_cmd_vs_allow_parallel_connection_establishments_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_vs.h>

Allow Parallel Connection Establishment.

This command enables the controller to accept establishing connections through the initiator and a periodic advertiser with responses simultaneously.

When enabled, HCI commands to create connections may then be used to connect to a synchronized peer while the initiator is running, or to start initiating before a connection establishment to a synchronized device has been completed.

After HCI Reset, this feature is disabled.

Event(s) generated (unless masked away): When the command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.