sdc_hci_cmd_le_clear_adv_sets()

uint8_t sdc_hci_cmd_le_clear_adv_sets

(

void

)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Clear Advertising Sets.

The description below is extracted from Core_v5.4, Vol 4, Part E, Section 7.8.60

The HCI_LE_Clear_Advertising_Sets command is used to remove all existing advertising sets from the Controller.

If advertising or periodic advertising is enabled on any advertising set, then the Controller shall return the error code Command Disallowed (0x0C).

Note: All advertising sets are cleared on HCI reset.

Event(s) generated (unless masked away): When the HCI_LE_Clear_Advertising_Sets command has completed, an HCI_Command_Complete event shall be generated.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.