sdc_hci_cmd_vs_zephyr_read_version_info()

uint8_t sdc_hci_cmd_vs_zephyr_read_version_info

(

sdc_hci_cmd_vs_zephyr_read_version_info_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_vs.h>

Zephyr Read Version Information.

Reads the values for the vendor version information for the local Controller.

The Hardware_Platform information defines the hardware manufacturer information. The Hardware_Variant is manufacturer specific and defines the hardware platform from that manufacturer.

The Firmware_Variant defines the type of firmware. It is possible to provide HCI firmware with limited functionality for example for bootloader operation. The Firmware_Version and Firmware_Revision define version information of the Firmware_Variant that is currently active. The Firmware_Build defines an additional counter for incremental builds.

Event(s) generated (unless masked away): When the command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.