sdc_hci_cmd_vs_qos_conn_event_report_enable()

uint8_t sdc_hci_cmd_vs_qos_conn_event_report_enable

(

const sdc_hci_cmd_vs_qos_conn_event_report_enable_t *

p_params

)

#include <softdevice_controller/include/sdc_hci_vs.h>

QoS Connection Event Reports enable.

This vendor specific command is used to enable or disable generation of QoS Connection event reports. See sdc_hci_subevent_vs_qos_conn_event_report_t. When enabled, one report will be generated every connection event.

Note

If the application does not pull a report in time, it will be overwritten.

After HCI Reset, this feature is disabled.

Event(s) generated (unless masked away): When the command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[in]

p_params

Input parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.