ESB_DEFAULT_CONFIG

#define ESB_DEFAULT_CONFIG

#include <include/esb.h>

Value:

        {                                                                      \
                .protocol = ESB_PROTOCOL_ESB_DPL,                              \
                .mode = ESB_MODE_PTX,                                          \
                .event_handler = 0,                                            \
                .bitrate = ESB_BITRATE_2MBPS,                                  \
                .crc = ESB_CRC_16BIT,                                          \
                .tx_output_power = 0,                                          \
                .retransmit_delay = 600,                                       \
                .retransmit_count = 3,                                         \
                .tx_mode = ESB_TXMODE_AUTO,                                    \
                .payload_length = 32,                                          \
                .selective_auto_ack = false,                                   \
                .use_fast_ramp_up = false                                      \
        }

Default radio parameters.

Roughly equal to the nRF24Lxx default parameters except for CRC, which is set to 16 bit, and protocol, which is set to DPL.