Memory Attributes

It is possible in the devicetree to mark the memory regions with attributes by using the zephyr,memory-attr property. This property and the related memory region can then be retrieved at run-time by leveraging a provided helper library.

The set of general attributes that can be specified in the property are defined and explained in include/zephyr/dt-bindings/memory-attr/memory-attr.h.

For example, to mark a memory region in the devicetree as non-volatile, cacheable, out-of-order:

mem: memory@10000000 {
    compatible = "mmio-sram";
    reg = <0x10000000 0x1000>;
    zephyr,memory-attr = <( DT_MEM_NON_VOLATILE | DT_MEM_CACHEABLE | DT_MEM_OOO )>;
};

Note

The zephyr,memory-attr usage does not result in any memory region actually created. When it is needed to create an actual section out of the devicetree defined memory region, it is possible to use the compatible zephyr,memory-region that will result (only when supported by the architecture) in a new linker section and region.

The zephyr,memory-attr property can also be used to set architecture-specific and software-specific custom attributes that can be interpreted at run time. This is leveraged, among other things, to create MPU regions out of devicetree defined memory regions, for example:

mem: memory@10000000 {
    compatible = "mmio-sram";
    reg = <0x10000000 0x1000>;
    zephyr,memory-region = "NOCACHE_REGION";
    zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM_NOCACHE) )>;
};

See include/zephyr/dt-bindings/memory-attr/memory-attr-arm.h and Arm Cortex-M Developer Guide for more details about MPU usage.

The conventional and recommended way to deal and manage with memory regions marked with attributes is by using the provided mem-attr helper library by enabling CONFIG_MEM_ATTR. When this option is enabled the list of memory regions and their attributes are compiled in a user-accessible array and a set of functions is made available that can be used to query, probe and act on regions and attributes (see next section for more details).

Note

The zephyr,memory-attr property is only a descriptive property of the capabilities of the associated memory region, but it does not result in any actual setting for the memory to be set. The user, code or subsystem willing to use this information to do some work (for example creating an MPU region out of the property) must use either the provided mem-attr library or the usual devicetree helpers to perform the required work / setting.

A test for the mem-attr library and its usage is provided in tests/subsys/mem_mgmt/mem_attr/.

Migration guide from zephyr,memory-region-mpu

When the zephyr,memory-attr property was introduced, the zephyr,memory-region-mpu property was removed and deprecated.

The developers that are still using the deprecated property can move to the new one by renaming the property and changing its value according to the following list:

"RAM"         -> <( DT_ARM_MPU(ATTR_MPU_RAM) )>
"RAM_NOCACHE" -> <( DT_ARM_MPU(ATTR_MPU_RAM_NOCACHE) )>
"FLASH"       -> <( DT_ARM_MPU(ATTR_MPU_FLASH) )>
"PPB"         -> <( DT_ARM_MPU(ATTR_MPU_PPB) )>
"IO"          -> <( DT_ARM_MPU(ATTR_MPU_IO) )>
"EXTMEM"      -> <( DT_ARM_MPU(ATTR_MPU_EXTMEM) )>

Memory Attributes Heap Allocator

It is possible to leverage the memory attribute property zephyr,memory-attr to define and create a set of memory heaps from which the user can allocate memory from with certain attributes / capabilities.

When the CONFIG_MEM_ATTR_HEAP is set, every region marked with one of the memory attributes listed in in include/zephyr/dt-bindings/memory-attr/memory-attr-sw.h is added to a pool of memory heaps used for dynamic allocation of memory buffers with certain attributes.

Here a non exhaustive list of possible attributes:

DT_MEM_SW_ALLOC_CACHE
DT_MEM_SW_ALLOC_NON_CACHE
DT_MEM_SW_ALLOC_DMA

For example we can define several memory regions with different attributes and use the appropriate attribute to indicate that it is possible to dynamically allocate memory from those regions:

mem_cacheable: memory@10000000 {
    compatible = "mmio-sram";
    reg = <0x10000000 0x1000>;
    zephyr,memory-attr = <( DT_MEM_CACHEABLE | DT_MEM_SW_ALLOC_CACHE )>;
};

mem_non_cacheable: memory@20000000 {
    compatible = "mmio-sram";
    reg = <0x20000000 0x1000>;
    zephyr,memory-attr = <( DT_MEM_NON_CACHEABLE | ATTR_SW_ALLOC_NON_CACHE )>;
};

mem_cacheable_big: memory@30000000 {
    compatible = "mmio-sram";
    reg = <0x30000000 0x10000>;
    zephyr,memory-attr = <( DT_MEM_CACHEABLE | DT_MEM_OOO | DT_MEM_SW_ALLOC_CACHE )>;
};

mem_cacheable_dma: memory@40000000 {
    compatible = "mmio-sram";
    reg = <0x40000000 0x10000>;
    zephyr,memory-attr = <( DT_MEM_CACHEABLE      | DT_MEM_DMA |
                            DT_MEM_SW_ALLOC_CACHE | DT_MEM_SW_ALLOC_DMA )>;
};

The user can then dynamically carve memory out of those regions using the provided functions, the library will take care of allocating memory from the correct heap depending on the provided attribute and size:

// Init the pool
mem_attr_heap_pool_init();

// Allocate 0x100 bytes of cacheable memory from `mem_cacheable`
block = mem_attr_heap_alloc(DT_MEM_SW_ALLOC_CACHE, 0x100);

// Allocate 0x200 bytes of non-cacheable memory aligned to 32 bytes
// from `mem_non_cacheable`
block = mem_attr_heap_aligned_alloc(ATTR_SW_ALLOC_NON_CACHE, 0x100, 32);

// Allocate 0x100 bytes of cacheable and dma-able memory from `mem_cacheable_dma`
block = mem_attr_heap_alloc(DT_MEM_SW_ALLOC_CACHE | DT_MEM_SW_ALLOC_DMA, 0x100);

When several regions are marked with the same attributes, the memory is allocated:

  1. From the regions where the zephyr,memory-attr property has the requested property (or properties).

  2. Among the regions as at point 1, from the smallest region if there is any unallocated space left for the requested size

  3. If there is not enough space, from the next bigger region able to accommodate the requested size

The following example shows the point 3:

// This memory is allocated from `mem_non_cacheable`
block = mem_attr_heap_alloc(DT_MEM_SW_ALLOC_CACHE, 0x100);

// This memory is allocated from `mem_cacheable_big`
block = mem_attr_heap_alloc(DT_MEM_SW_ALLOC_CACHE, 0x5000);

Note

The framework is assuming that the memory regions used to create the heaps are usable by the code and available at init time. The user must take of initializing and setting the memory area before calling mem_attr_heap_pool_init().

That means that the region must be correctly configured in terms of MPU / MMU (if needed) and that an actual heap can be created out of it, for example by leveraging the zephyr,memory-region property to create a proper linker section to accommodate the heap.

API Reference

Memory-Attr Interface
Memory heaps based on memory attributes