Zephyr API Documentation
3.6.99
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
thread.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2019 Intel Corporation
3
* SPDX-License-Identifier: Apache-2.0
4
*/
5
6
#ifndef ZEPHYR_INCLUDE_ARCH_X86_INTEL64_THREAD_H_
7
#define ZEPHYR_INCLUDE_ARCH_X86_INTEL64_THREAD_H_
8
9
#define X86_THREAD_FLAG_ALL 0x01
/* _thread_arch.flags: entire state saved */
10
11
/*
12
* GDT selectors - these must agree with the GDT layout in locore.S.
13
*/
14
15
#define X86_KERNEL_CS_32 0x08
/* 32-bit kernel code */
16
#define X86_KERNEL_DS_32 0x10
/* 32-bit kernel data */
17
#define X86_KERNEL_CS 0x18
/* 64-bit kernel code */
18
#define X86_KERNEL_DS 0x20
/* 64-bit kernel data */
19
#define X86_USER_CS_32 0x28
/* 32-bit user data (unused) */
20
#define X86_USER_DS 0x30
/* 64-bit user mode data */
21
#define X86_USER_CS 0x38
/* 64-bit user mode code */
22
23
/* Value programmed into bits 63:32 of STAR MSR with proper segment
24
* descriptors for implementing user mode with syscall/sysret
25
*/
26
#define X86_STAR_UPPER ((X86_USER_CS_32 << 16) | X86_KERNEL_CS)
27
28
#define X86_KERNEL_CPU0_TR 0x40
/* 64-bit task state segment */
29
#define X86_KERNEL_CPU1_TR 0x50
/* 64-bit task state segment */
30
#define X86_KERNEL_CPU2_TR 0x60
/* 64-bit task state segment */
31
#define X86_KERNEL_CPU3_TR 0x70
/* 64-bit task state segment */
32
33
/*
34
* Some SSE definitions. Ideally these will ultimately be shared with 32-bit.
35
*/
36
37
#define X86_FXSAVE_SIZE 512
/* size and alignment of buffer ... */
38
#define X86_FXSAVE_ALIGN 16
/* ... for FXSAVE/FXRSTOR ops */
39
40
/* MXCSR Control and Status Register for SIMD floating-point operations.
41
* Set default value 1F80H according to the Intel(R) 64 and IA-32 Manual.
42
* Disable denormals-are-zeros mode.
43
*/
44
#define X86_MXCSR_SANE 0x1f80
45
46
#ifndef _ASMLANGUAGE
47
48
#include <
zephyr/types.h
>
49
#include <
zephyr/arch/x86/mmustructs.h
>
50
51
/*
52
* 64-bit Task State Segment. One defined per CPU.
53
*/
54
55
struct
x86_tss64
{
56
/*
57
* Architecturally-defined portion. It is somewhat tedious to
58
* enumerate each member specifically (rather than using arrays)
59
* but we need to get (some of) their offsets from assembly.
60
*/
61
62
uint8_t
reserved0
[4];
63
64
uint64_t
rsp0
;
/* privileged stacks */
65
uint64_t
rsp1
;
66
uint64_t
rsp2
;
67
68
uint8_t
reserved
[8];
69
70
uint64_t
ist1
;
/* interrupt stacks */
71
uint64_t
ist2
;
72
uint64_t
ist3
;
73
uint64_t
ist4
;
74
uint64_t
ist5
;
75
uint64_t
ist6
;
76
uint64_t
ist7
;
77
78
uint8_t
reserved1
[10];
79
80
uint16_t
iomapb
;
/* offset to I/O base */
81
82
/*
83
* Zephyr specific portion. Stash per-CPU data here for convenience.
84
*/
85
86
struct
_cpu *
cpu
;
87
#ifdef CONFIG_USERSPACE
88
/* Privilege mode stack pointer value when doing a system call */
89
char
*
psp
;
90
91
/* Storage area for user mode stack pointer when doing a syscall */
92
char
*
usp
;
93
#endif
/* CONFIG_USERSPACE */
94
} __packed __aligned(8);
95
96
typedef
struct
x86_tss64
x86_tss64_t
;
97
98
/*
99
* The _callee_saved registers are unconditionally saved/restored across
100
* context switches; the _thread_arch registers are only preserved when
101
* the thread is interrupted. _arch_thread.flags tells __resume when to
102
* cheat and only restore the first set. For more details see locore.S.
103
*/
104
105
struct
_callee_saved {
106
uint64_t
rsp;
107
uint64_t
rbx;
108
uint64_t
rbp;
109
uint64_t
r12;
110
uint64_t
r13;
111
uint64_t
r14;
112
uint64_t
r15;
113
uint64_t
rip;
114
uint64_t
rflags;
115
};
116
117
typedef
struct
_callee_saved _callee_saved_t;
118
119
struct
_thread_arch {
120
uint8_t
flags
;
121
122
#ifdef CONFIG_USERSPACE
123
#ifndef CONFIG_X86_COMMON_PAGE_TABLE
124
/* Physical address of the page tables used by this thread */
125
uintptr_t
ptables;
126
#endif
/* CONFIG_X86_COMMON_PAGE_TABLE */
127
128
/* Initial privilege mode stack pointer when doing a system call.
129
* Un-set for supervisor threads.
130
*/
131
char
*psp;
132
133
/* SS and CS selectors for this thread when restoring context */
134
uint64_t
ss;
135
uint64_t
cs;
136
#endif
137
138
uint64_t
rax;
139
uint64_t
rcx;
140
uint64_t
rdx;
141
uint64_t
rsi;
142
uint64_t
rdi;
143
uint64_t
r8;
144
uint64_t
r9;
145
uint64_t
r10;
146
uint64_t
r11;
147
char
__aligned(
X86_FXSAVE_ALIGN
) sse[
X86_FXSAVE_SIZE
];
148
};
149
150
typedef
struct
_thread_arch _thread_arch_t;
151
152
#endif
/* _ASMLANGUAGE */
153
154
#endif
/* ZEPHYR_INCLUDE_ARCH_X86_INTEL64_THREAD_H_ */
X86_FXSAVE_ALIGN
#define X86_FXSAVE_ALIGN
Definition:
thread.h:38
X86_FXSAVE_SIZE
#define X86_FXSAVE_SIZE
Definition:
thread.h:37
types.h
mmustructs.h
flags
flags
Definition:
parser.h:96
uint64_t
__UINT64_TYPE__ uint64_t
Definition:
stdint.h:91
uint8_t
__UINT8_TYPE__ uint8_t
Definition:
stdint.h:88
uintptr_t
__UINTPTR_TYPE__ uintptr_t
Definition:
stdint.h:105
uint16_t
__UINT16_TYPE__ uint16_t
Definition:
stdint.h:89
x86_tss64
Definition:
thread.h:55
x86_tss64::ist2
uint64_t ist2
Definition:
thread.h:71
x86_tss64::ist6
uint64_t ist6
Definition:
thread.h:75
x86_tss64::cpu
struct _cpu * cpu
Definition:
thread.h:86
x86_tss64::rsp1
uint64_t rsp1
Definition:
thread.h:65
x86_tss64::reserved0
uint8_t reserved0[4]
Definition:
thread.h:62
x86_tss64::reserved1
uint8_t reserved1[10]
Definition:
thread.h:78
x86_tss64::ist4
uint64_t ist4
Definition:
thread.h:73
x86_tss64::ist7
uint64_t ist7
Definition:
thread.h:76
x86_tss64::ist3
uint64_t ist3
Definition:
thread.h:72
x86_tss64::psp
char * psp
Definition:
thread.h:89
x86_tss64::rsp2
uint64_t rsp2
Definition:
thread.h:66
x86_tss64::ist1
uint64_t ist1
Definition:
thread.h:70
x86_tss64::rsp0
uint64_t rsp0
Definition:
thread.h:64
x86_tss64::ist5
uint64_t ist5
Definition:
thread.h:74
x86_tss64::iomapb
uint16_t iomapb
Definition:
thread.h:80
x86_tss64::reserved
uint8_t reserved[8]
Definition:
thread.h:68
x86_tss64::usp
char * usp
Definition:
thread.h:92
zephyr
arch
x86
intel64
thread.h
Generated on Thu Sep 26 2024 10:47:06 for Zephyr API Documentation by
1.9.6