nrf_gzll_constants.h

Go to the documentation of this file.

/*
 * Copyright (c) 2021 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
 */
 
#ifndef NRF_GZLL_CONSTANTS_H__
#define NRF_GZLL_CONSTANTS_H__
 
#include "nrf_gzll_glue.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
 
/*****************************************************************************/
/*****************************************************************************/
#define NRF_GZLL_SWI_IRQn           nrf_gzll_swi_irqn               
#define NRF_GZLL_SWI_IRQ_HANDLER    nrf_gzll_swi_irq_handler        
#define NRF_GZLL_TIMER              nrf_gzll_timer                  
#define NRF_GZLL_TIMER_IRQn         nrf_gzll_timer_irqn             
#define NRF_GZLL_TIMER_IRQ_HANDLER  nrf_gzll_timer_irq_handler      
 
// In addition, Gazell uses the radio peripheral and radio interrupts.
 
/*
 * PPI configuration
 */
#if defined(PPI_PRESENT) || defined(DOXYGEN)
#define NRF_GZLL_PPI_EEP0 (*nrf_gzll_ppi_eep0)                      
#define NRF_GZLL_PPI_TEP0 (*nrf_gzll_ppi_tep0)                      
#define NRF_GZLL_PPI_EEP1 (*nrf_gzll_ppi_eep1)                      
#define NRF_GZLL_PPI_TEP1 (*nrf_gzll_ppi_tep1)                      
#define NRF_GZLL_PPI_EEP2 (*nrf_gzll_ppi_eep2)                      
#define NRF_GZLL_PPI_TEP2 (*nrf_gzll_ppi_tep2)                      
 
#define NRF_GZLL_PPI_CHEN_MSK_0_AND_1 (nrf_gzll_ppi_chen_msk_0_and_1) 
#define NRF_GZLL_PPI_CHEN_MSK_2       (nrf_gzll_ppi_chen_msk_2)       
#endif
 
#if defined(DPPI_PRESENT) || defined(DOXYGEN)
#define NRF_GZLL_DPPI_CH0 (nrf_gzll_dppi_ch0)                       
#define NRF_GZLL_DPPI_CH1 (nrf_gzll_dppi_ch1)                       
#define NRF_GZLL_DPPI_CH2 (nrf_gzll_dppi_ch2)                       
 
#define NRF_GZLL_DPPI_CHEN_MSK_0_AND_1 (nrf_gzll_dppi_chen_msk_0_and_1) 
#define NRF_GZLL_DPPI_CHEN_MSK_2       (nrf_gzll_dppi_chen_msk_2)       
#endif
/*****************************************************************************/
/*****************************************************************************/
#define NRF_GZLL_CONST_PIPE_COUNT            8                      
#define NRF_GZLL_CONST_FIFO_LENGTH           3                      
#define NRF_GZLL_CONST_MAX_TOTAL_PACKETS     6                      
#define NRF_GZLL_CONST_MAX_PAYLOAD_LENGTH    32                     
#define NRF_GZLL_CONST_CALLBACK_QUEUE_LENGTH 10                     
/*****************************************************************************/
/*****************************************************************************/
#define NRF_GZLL_DEFAULT_TX_POWER NRF_GZLL_TX_POWER_0_DBM           
#define NRF_GZLL_DEFAULT_DATARATE NRF_GZLL_DATARATE_2MBIT           
 
#define NRF_GZLL_DEFAULT_CHANNEL_TABLE        {4, 25, 42, 63, 77}   
#define NRF_GZLL_DEFAULT_CHANNEL_TABLE_SIZE   5                     
#define NRF_GZLL_CONST_MAX_CHANNEL_TABLE_SIZE 16                    
/*****************************************************************************/
/*****************************************************************************/
 
/*
Corresponds to Legacy nRFgo SDK Gazell config:
#define GZLL_DEFAULT_ADDRESS_PIPE0 {0x01, 0x04, 0x07, 0x0A, 0x0D}
#define GZLL_DEFAULT_ADDRESS_PIPE1 {0x02, 0x05, 0x08, 0x0B, 0x0E}
#define GZLL_DEFAULT_ADDRESS_PIPE2 3
#define GZLL_DEFAULT_ADDRESS_PIPE3 4
#define GZLL_DEFAULT_ADDRESS_PIPE4 5
#define GZLL_DEFAULT_ADDRESS_PIPE5 6
*/
 
#define NRF_GZLL_DEFAULT_FULL_ADDRESS_PIPE0  {0x01, 0x04, 0x07, 0x0A, 0x0D}   
#define NRF_GZLL_DEFAULT_BASE_ADDRESS_0      0x0D0A0704                       
#define NRF_GZLL_DEFAULT_BASE_ADDRESS_1      0x0E0B0805                       
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_0       1                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_1       2                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_2       3                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_3       4                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_4       5                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_5       6                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_6       7                                
#define NRF_GZLL_DEFAULT_PREFIX_BYTE_7       8                                
#define NRF_GZLL_DEFAULT_BASE_ADDRESS_LENGTH NRF_GZLL_BASE_ADDRESS_LENGTH_4B  
#define NRF_GZLL_DEFAULT_RX_PIPES_ENABLED    0x000000FF                       
/*****************************************************************************/
/*****************************************************************************/
#define NRF_GZLL_DEFAULT_TIMESLOT_PERIOD                 600                                                      
#define NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL           2                                                        
#define NRF_GZLL_DEFAULT_DEVICE_CHANNEL_SELECTION_POLICY NRF_GZLL_DEVICE_CHANNEL_SELECTION_POLICY_USE_SUCCESSFUL  
#define NRF_GZLL_DEFAULT_MAX_TX_ATTEMPTS                 0                                                        
#define NRF_GZLL_DEFAULT_XOSC_CTL                        NRF_GZLL_XOSC_CTL_AUTO                                   
#define NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL_WHEN_DEVICE_OUT_OF_SYNC  15                                        
#define NRF_GZLL_DEFAULT_SYNC_LIFETIME (3 * NRF_GZLL_DEFAULT_CHANNEL_TABLE_SIZE * NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL) 
#define NRF_GZLL_PA_LNA_MAX_RAMP_UP_TIME    129                               
#define NRF_GZLL_PA_LNA_PPI_CHANNELS_NUM    4                                 
 
#ifdef __cplusplus
}
#endif
 
#endif