nrfxlib API 0.1.0
|
Data Structures | |
struct | LC3EncodeInput_t |
LC3 encoder input PCM data structure. More... | |
struct | LC3EncodeOutput_t |
LC3 encoder output data structure. More... | |
struct | LC3DecodeInput_t |
LC3 decoder input bit stream structure. More... | |
struct | LC3DecodeOutput_t |
LC3 decoder output PCM structure. More... | |
Typedefs | |
typedef void * | LC3EncoderHandle_t |
LC3 encoder handle type. | |
typedef void * | LC3DecoderHandle_t |
LC3 decoder handle type. | |
Enumerations | |
enum | LC3FrameSizeConfig_t { LC3FrameSize10MsConfig , LC3FrameSize7_5MsConfig , LC3FrameSizeBothConfig } |
Frame Size for configuration. More... | |
enum | LC3FrameSize_t { LC3FrameSize10Ms , LC3FrameSize7_5Ms } |
Session Frame Size. More... | |
enum | LC3BFI_t { GoodFrame , BadFrame } |
Bad Frame Indicator (BFI). More... | |
Functions | |
int32_t | LC3Initialize (uint8_t encoderSampleRates, uint8_t decoderSampleRates, LC3FrameSizeConfig_t frameSizeConfig, uint8_t uniqueSessions, uint8_t *buffer, uint32_t *bufferSize) |
Initializes the LC3 Codec. | |
int32_t | LC3Deinitialize (void) |
Deinitializes the LC3 Codec. | |
LC3EncoderHandle_t | LC3EncodeSessionOpen (uint16_t sampleRate, uint8_t bitsPerSample, LC3FrameSize_t frameSize, uint8_t *buffer, uint16_t *bufferSize, int32_t *result) |
Opens and initializes an LC3 Encoder session. | |
int32_t | LC3EncodeSessionData (LC3EncoderHandle_t encodeHandle, LC3EncodeInput_t *encodeInput, LC3EncodeOutput_t *encodeOutput) |
Encodes a frame of data using LC3. | |
void | LC3EncodeSessionClose (LC3EncoderHandle_t encodeHandle) |
Closes an LC3 Encoder session. | |
LC3DecoderHandle_t | LC3DecodeSessionOpen (uint16_t sampleRate, uint8_t bitsPerSample, LC3FrameSize_t frameSize, uint8_t *buffer, uint16_t *bufferSize, int32_t *result) |
Opens and initializes an LC3 Decoder session. | |
int32_t | LC3DecodeSessionData (LC3DecoderHandle_t decodeHandle, LC3DecodeInput_t *decodeInput, LC3DecodeOutput_t *decodeOutput) |
Decodes a frame of data using LC3. | |
void | LC3DecodeSessionClose (LC3DecoderHandle_t decodeHandle) |
Closes an LC3 Decoder session. | |
uint16_t | LC3BitstreamBuffersize (uint16_t sampleRate, uint32_t maxBitRate, LC3FrameSize_t frameSize, int32_t *result) |
Calculates the buffer size required for bit stream data. | |
uint16_t | LC3PCMBuffersize (uint16_t sampleRate, uint8_t bitDepth, LC3FrameSize_t frameSize, int32_t *result) |
Calculates the buffer size required for PCM data. | |
LC3 Result Codes | |
#define | LC3_ERROR_OFFSET (-5000) |
Offset for LC3 error values. | |
#define | LC3_RESULT_NO_ERROR (0) |
Success. | |
#define | LC3_RESULT_INVALID_PARAMETER ((LC3_ERROR_OFFSET)-1) |
Error: invalid parameter detected. | |
#define | LC3_RESULT_INSUFFICIENT_RESOURCES ((LC3_ERROR_OFFSET)-2) |
Error: not enough memory available. | |
#define | LC3_RESULT_NOT_INITIALIZED ((LC3_ERROR_OFFSET)-3) |
Error: not initialized before use. | |
#define | LC3_RESULT_UNKNOWN_ERROR ((LC3_ERROR_OFFSET)-4) |
Error: unknown error detected. | |
#define | LC3_RESULT_INVALID_BITRATE ((LC3_ERROR_OFFSET)-5) |
Error: invalid bitrate value. | |
#define | LC3_RESULT_INPUT_BUFFER_TOO_SMALL ((LC3_ERROR_OFFSET)-6) |
Error: passed buffer size too small for input data. | |
#define | LC3_RESULT_OUTPUT_BUFFER_TOO_SMALL ((LC3_ERROR_OFFSET)-7) |
Error: passed buffer size too small for output data. | |
#define | LC3_RESULT_INVALID_BITSPERSAMPLE ((LC3_ERROR_OFFSET)-8) |
Error: invalid bits per sample value. | |
#define | LC3_RESULT_INVALID_SAMPLERATE ((LC3_ERROR_OFFSET)-9) |
Error: invalid sample rate value. | |
#define | LC3_RESULT_BITERRORCONDITION ((LC3_ERROR_OFFSET)-10) |
Error: bit error condition detected in bit stream data. | |
#define | LC3_RESULT_FEATURE_NOT_SUPPORTED ((LC3_ERROR_OFFSET)-11) |
Error: feature not supported in this build. | |
#define | LC3_RESULT_STILL_IN_USE ((LC3_ERROR_OFFSET)-12) |
Error: Sessions not closed, buffer still in use. | |
#define | LC3_RESULT_ALREADY_INITIALIZED ((LC3_ERROR_OFFSET)-13) |
Error: Codec already initialized, call LC3Deinitialize first. | |
LC3 Sample Rate Bits | |
#define | LC3_SAMPLE_RATE_NONE (0x00) |
No sample rate selected. | |
#define | LC3_SAMPLE_RATE_8_KHZ (0x01) |
8 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_16_KHZ (0x02) |
16 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_24_KHZ (0x04) |
24 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_32_KHZ (0x08) |
32 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_441_KHZ (0x10) |
44.1 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_48_KHZ (0x20) |
48 kHz sample rate bit. | |
#define | LC3_SAMPLE_RATE_ALL (0x1F) |
All sample rates selected. | |