sdc_hci_cmd_ip_read_local_supported_commands()

uint8_t sdc_hci_cmd_ip_read_local_supported_commands

(

sdc_hci_cmd_ip_read_local_supported_commands_return_t *

p_return

)

#include <softdevice_controller/include/sdc_hci_cmd_info_params.h>

Read Local Supported Commands.

The description below is extracted from Core_v5.4, Vol 4, Part E, Section 7.4.2

This command reads the list of HCI commands supported for the local Controller.

This command shall return the Supported_Commands configuration parameter.

See Section 6.27 for more information.

Event(s) generated (unless masked away): When the HCI_Read_Local_Supported_Commands command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out]

p_return

Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.