◆ sdc_hci_cmd_cb_read_conn_accept_timeout()

uint8_t sdc_hci_cmd_cb_read_conn_accept_timeout ( sdc_hci_cmd_cb_read_conn_accept_timeout_return_t * p_return )

#include <softdevice_controller/include/sdc_hci_cmd_controller_baseband.h>

Read Connection Accept Timeout.

The description below is extracted from Core_v5.4, Vol 4, Part E, Section 7.3.13

This command reads the value for the Connection_Accept_Timeout configuration parameter. See Section 6.7.

Event(s) generated (unless masked away): When the HCI_Read_Connection_Timeout command has completed, an HCI_Command_Complete event shall be generated.

Parameters

[out] p_return Extra return parameters.

Return values

0	if success.

Returns: Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.