sdc_hci_cmd_le_read_phy()

uint8_t sdc_hci_cmd_le_read_phy	(	const sdc_hci_cmd_le_read_phy_t *	p_params,
		sdc_hci_cmd_le_read_phy_return_t *	p_return
	)

#include <softdevice_controller/include/sdc_hci_cmd_le.h>

LE Read PHY.

The description below is extracted from Core_v5.4, Vol 4, Part E, Section 7.8.47

The HCI_LE_Read_PHY command is used to read the current transmitter PHY and receiver PHY on the connection identified by the Connection_Handle.

Event(s) generated (unless masked away): When the HCI_LE_Read_PHY command has completed, an HCI_Command_- Complete event shall be generated.

Parameters

[in]	p_params	Input parameters.
[out]	p_return	Extra return parameters.

Return values

0	if success.

Returns

Returns value between 0x01-0xFF in case of error. See Vol 2, Part D, Error for a list of error codes and descriptions.