TF-M Hello World

The TF-M Hello World sample is based on Hello World that demonstrates adding Trusted Firmware-M (TF-M) to an application.

Requirements

The sample supports the following development kits:

Hardware platforms

PCA

Board name

Board target

nRF9161 DK

PCA10153

nrf9161dk

nrf9161dk/nrf9161/ns

nRF9160 DK

PCA10090

nrf9160dk

nrf9160dk/nrf9160/ns

nRF9151 DK

PCA10171

nrf9151dk

nrf9151dk/nrf9151/ns

nRF5340 DK

PCA10095

nrf5340dk

nrf5340dk/nrf5340/cpuapp/ns

Overview

This sample uses the Platform Security Architecture (PSA) API to calculate a SHA-256 digest and the TF-M platform read service to read two FICR registers. The PSA API call is handled by the TF-M secure firmware.

Building and running

This sample can be found under samples/tfm/tfm_hello_world in the nRF Connect SDK folder structure.

To build the sample, follow the instructions in Building an application for your preferred building environment. See also Programming an application for programming steps and Testing and optimization for general information about testing and debugging in the nRF Connect SDK.

Note

When building repository applications in the SDK repositories, building with sysbuild is enabled by default. If you work with out-of-tree freestanding applications, you need to manually pass the --sysbuild parameter to every build command or configure west to always use it.

Testing

After programming the sample, the following output is displayed in the console:

Hello World! nrf5340dk/nrf5340/cpuapp/ns
Reading some secure memory that NS is allowed to read
Approximate IPC overhead us: 65
FICR->INFO.FLASH: 0x00000400
Generating random number
0x03607cef3bdcbbec52edebeb7a0e80756b96d647c82fab068f26d436ff078152
Example finished successfully!

Dependencies

This sample uses the TF-M module that can be found in the following location in the nRF Connect SDK folder structure:

  • modules/tee/tfm/

This sample uses the following libraries: