st25r3911b_multiple_reg_write()

int st25r3911b_multiple_reg_write	(	uint8_t	start_reg,
		uint8_t *	val,
		size_t	len
	)

#include <lib/st25r3911b/st25r3911b_spi.h>

Write multiple NFC Reader registers.

The register address is auto-incrementing. Registers are written in the order ascending from the starting address.

Parameters

[in]	start_reg	The address of the register from which the writing will start. See Registers for the register addresses.
[in]	val	Register values to write.
[in]	len	Number of registers to write.

Return values

0	If the operation was successful. Otherwise, a (negative) error code is returned.