|
| enum | nrf_cloud_evt_type {
NRF_CLOUD_EVT_TRANSPORT_CONNECTED = 0x1
, NRF_CLOUD_EVT_TRANSPORT_CONNECTING
, NRF_CLOUD_EVT_USER_ASSOCIATION_REQUEST
, NRF_CLOUD_EVT_USER_ASSOCIATED
,
NRF_CLOUD_EVT_READY
, NRF_CLOUD_EVT_RX_DATA_GENERAL
, NRF_CLOUD_EVT_RX_DATA_DISCON
, NRF_CLOUD_EVT_RX_DATA_LOCATION
,
NRF_CLOUD_EVT_RX_DATA_SHADOW
, NRF_CLOUD_EVT_PINGRESP
, NRF_CLOUD_EVT_SENSOR_DATA_ACK
, NRF_CLOUD_EVT_TRANSPORT_DISCONNECTED
,
NRF_CLOUD_EVT_FOTA_START
, NRF_CLOUD_EVT_FOTA_DONE
, NRF_CLOUD_EVT_FOTA_ERROR
, NRF_CLOUD_EVT_TRANSPORT_CONNECT_ERROR
,
NRF_CLOUD_EVT_FOTA_JOB_AVAILABLE
, NRF_CLOUD_EVT_ERROR = 0xFF
} |
| | Asynchronous nRF Cloud events notified by the module. More...
|
| |
| enum | nrf_cloud_error_status {
NRF_CLOUD_ERR_STATUS_NONE = 0
, NRF_CLOUD_ERR_STATUS_MQTT_CONN_FAIL
, NRF_CLOUD_ERR_STATUS_MQTT_CONN_BAD_PROT_VER
, NRF_CLOUD_ERR_STATUS_MQTT_CONN_ID_REJECTED
,
NRF_CLOUD_ERR_STATUS_MQTT_CONN_SERVER_UNAVAIL
, NRF_CLOUD_ERR_STATUS_MQTT_CONN_BAD_USR_PWD
, NRF_CLOUD_ERR_STATUS_MQTT_CONN_NOT_AUTH
, NRF_CLOUD_ERR_STATUS_MQTT_SUB_FAIL
,
NRF_CLOUD_ERR_STATUS_AGNSS_PROC
, NRF_CLOUD_ERR_STATUS_PGPS_PROC
} |
| | nRF Cloud error status, used to describe NRF_CLOUD_EVT_ERROR event. More...
|
| |
| enum | nrf_cloud_disconnect_status { NRF_CLOUD_DISCONNECT_USER_REQUEST
, NRF_CLOUD_DISCONNECT_CLOSED_BY_REMOTE
, NRF_CLOUD_DISCONNECT_INVALID_REQUEST
, NRF_CLOUD_DISCONNECT_MISC
} |
| | nRF Cloud disconnect status, used to describe NRF_CLOUD_EVT_TRANSPORT_DISCONNECTED event. More...
|
| |
| enum | nrf_cloud_connect_result {
NRF_CLOUD_CONNECT_RES_SUCCESS = 0
, NRF_CLOUD_CONNECT_RES_ERR_NOT_INITD = -1
, NRF_CLOUD_CONNECT_RES_ERR_NETWORK = -3
, NRF_CLOUD_CONNECT_RES_ERR_BACKEND = -4
,
NRF_CLOUD_CONNECT_RES_ERR_MISC = -5
, NRF_CLOUD_CONNECT_RES_ERR_NO_MEM = -6
, NRF_CLOUD_CONNECT_RES_ERR_PRV_KEY = -7
, NRF_CLOUD_CONNECT_RES_ERR_CERT = -8
,
NRF_CLOUD_CONNECT_RES_ERR_CERT_MISC = -9
, NRF_CLOUD_CONNECT_RES_ERR_TIMEOUT_NO_DATA = -10
, NRF_CLOUD_CONNECT_RES_ERR_ALREADY_CONNECTED = -11
} |
| | nRF Cloud connect result. Used as return value for nrf_cloud_connect() and to describe NRF_CLOUD_EVT_TRANSPORT_CONNECT_ERROR event. More...
|
| |
| enum | nrf_cloud_error {
NRF_CLOUD_ERROR_UNKNOWN = -1
, NRF_CLOUD_ERROR_NONE = 0
, NRF_CLOUD_ERROR_BAD_REQUEST = 40000
, NRF_CLOUD_ERROR_INVALID_CERT = 40001
,
NRF_CLOUD_ERROR_DISSOCIATE = 40002
, NRF_CLOUD_ERROR_ACCESS_DENIED = 40100
, NRF_CLOUD_ERROR_DEV_ID_IN_USE = 40101
, NRF_CLOUD_ERROR_INVALID_OWNER_CODE = 40102
,
NRF_CLOUD_ERROR_DEV_NOT_ASSOCIATED = 40103
, NRF_CLOUD_ERROR_DATA_NOT_FOUND = 40410
, NRF_CLOUD_ERROR_NRF_DEV_NOT_FOUND = 40411
, NRF_CLOUD_ERROR_NO_DEV_NOT_PROV = 40412
,
NRF_CLOUD_ERROR_NO_DEV_DISSOCIATE = 40413
, NRF_CLOUD_ERROR_NO_DEV_DELETE = 40414
, NRF_CLOUD_ERROR_NOT_FOUND_NO_ERROR = 40499
, NRF_CLOUD_ERROR_BAD_RANGE = 41600
,
NRF_CLOUD_ERROR_VALIDATION = 42200
, NRF_CLOUD_ERROR_INTERNAL_SERVER = 50010
} |
| | nRF Cloud error codes. See the Error Codes section of nRF Cloud API documentation for more information. More...
|
| |
| enum | nrf_cloud_sensor {
NRF_CLOUD_SENSOR_GNSS
, NRF_CLOUD_SENSOR_FLIP
, NRF_CLOUD_SENSOR_BUTTON
, NRF_CLOUD_SENSOR_TEMP
,
NRF_CLOUD_SENSOR_HUMID
, NRF_CLOUD_SENSOR_AIR_PRESS
, NRF_CLOUD_SENSOR_AIR_QUAL
, NRF_CLOUD_LTE_LINK_RSRP
,
NRF_CLOUD_LOG
, NRF_CLOUD_DICTIONARY_LOG
, NRF_CLOUD_DEVICE_INFO
, NRF_CLOUD_SENSOR_LIGHT
} |
| | Sensor types supported by the nRF Cloud. More...
|
| |
| enum | nrf_cloud_topic_type { NRF_CLOUD_TOPIC_STATE = 0x1
, NRF_CLOUD_TOPIC_MESSAGE
, NRF_CLOUD_TOPIC_BULK
, NRF_CLOUD_TOPIC_BIN
} |
| | Topic types supported by nRF Cloud. More...
|
| |
| enum | nrf_cloud_fota_status {
NRF_CLOUD_FOTA_QUEUED = 0
, NRF_CLOUD_FOTA_IN_PROGRESS = 1
, NRF_CLOUD_FOTA_FAILED = 2
, NRF_CLOUD_FOTA_SUCCEEDED = 3
,
NRF_CLOUD_FOTA_TIMED_OUT = 4
, NRF_CLOUD_FOTA_CANCELED = 5
, NRF_CLOUD_FOTA_REJECTED = 6
, NRF_CLOUD_FOTA_DOWNLOADING = 7
} |
| | FOTA status reported to nRF Cloud and notified in nrf_cloud_fota_poll_handler_t. More...
|
| |
| enum | nrf_cloud_fota_type {
NRF_CLOUD_FOTA_TYPE__FIRST = 0
, NRF_CLOUD_FOTA_APPLICATION = NRF_CLOUD_FOTA_TYPE__FIRST
, NRF_CLOUD_FOTA_MODEM_DELTA = 1
, NRF_CLOUD_FOTA_BOOTLOADER = 2
,
NRF_CLOUD_FOTA_MODEM_FULL = 5
, NRF_CLOUD_FOTA_TYPE__INVALID
} |
| | FOTA update type. More...
|
| |
| enum | nrf_cloud_fota_validate_status {
NRF_CLOUD_FOTA_VALIDATE_NONE = 0
, NRF_CLOUD_FOTA_VALIDATE_PENDING
, NRF_CLOUD_FOTA_VALIDATE_PASS
, NRF_CLOUD_FOTA_VALIDATE_FAIL
,
NRF_CLOUD_FOTA_VALIDATE_UNKNOWN
, NRF_CLOUD_FOTA_VALIDATE_DONE
, NRF_CLOUD_FOTA_VALIDATE_ERROR
} |
| | Validity of an in-progress/installed FOTA update. More...
|
| |
| enum | nrf_cloud_fota_bootloader_status_flags { NRF_CLOUD_FOTA_BL_STATUS_CLEAR = 0
, NRF_CLOUD_FOTA_BL_STATUS_S0_FLAG_SET = (1 << 0)
, NRF_CLOUD_FOTA_BL_STATUS_S0_WAS_ACTIVE = (1 << 1)
, NRF_CLOUD_FOTA_BL_STATUS_REBOOTED = (1 << 2)
} |
| | Status flags for tracking the update process of the b1 bootloader (MCUBOOT) More...
|
| |
| enum | nrf_cloud_shadow_info { NRF_CLOUD_INFO_NO_CHANGE = 0
, NRF_CLOUD_INFO_SET = 1
, NRF_CLOUD_INFO_CLEAR = 2
} |
| | How the info sections are handled when encoding shadow data. More...
|
| |
| enum | nrf_cloud_gnss_type {
NRF_CLOUD_GNSS_TYPE_INVALID
, NRF_CLOUD_GNSS_TYPE_PVT
, NRF_CLOUD_GNSS_TYPE_NMEA
, NRF_CLOUD_GNSS_TYPE_MODEM_PVT
,
NRF_CLOUD_GNSS_TYPE_MODEM_NMEA
} |
| | GNSS data type contained in nrf_cloud_gnss_data. More...
|
| |
|
| int | nrf_cloud_init (const struct nrf_cloud_init_param *param) |
| | Initialize the module.
|
| |
| int | nrf_cloud_uninit (void) |
| | Uninitialize nRF Cloud; disconnects cloud connection and cleans up allocated memory.
|
| |
| int | nrf_cloud_print_details (void) |
| | Print details about cloud connection.
|
| |
| int | nrf_cloud_get_imei (char *buf, size_t buf_sz) |
| | Retrieve the IMEI.
|
| |
| int | nrf_cloud_get_uuid (char *buf, size_t buf_sz) |
| | Retrieve the device's UUID.
|
| |
| int | nrf_cloud_get_modem_fw (char *buf, size_t buf_sz) |
| | Retrieve the Modem firmware version.
|
| |
| int | nrf_cloud_connect (void) |
| | Connect to the cloud.
|
| |
| int | nrf_cloud_sensor_data_send (const struct nrf_cloud_sensor_data *param) |
| | Send sensor data reliably.
|
| |
| int | nrf_cloud_shadow_device_status_update (const struct nrf_cloud_device_status *const dev_status) |
| | Update the device status in the shadow.
|
| |
| int | nrf_cloud_sensor_data_stream (const struct nrf_cloud_sensor_data *param) |
| | Stream sensor data. Uses lowest QoS; no acknowledgment,.
|
| |
| int | nrf_cloud_send (const struct nrf_cloud_tx_data *msg) |
| | Send data to nRF Cloud.
|
| |
| int | nrf_cloud_obj_shadow_update (struct nrf_cloud_obj *const shadow_obj) |
| | Update the device's shadow with the data from the provided object.
|
| |
| int | nrf_cloud_disconnect (void) |
| | Disconnect from the cloud.
|
| |
| int | nrf_cloud_process (void) |
| | Function that must be called periodically to keep the module functional.
|
| |
| int | nrf_cloud_modem_fota_completed (const bool fota_success) |
| | The application has handled reinit after a modem FOTA update and the LTE link has been reestablished. This function must be called in order to complete the modem update. Depends on.
|
| |
| int | nrf_cloud_client_id_get (char *id_buf, size_t id_buf_sz) |
| | Retrieve the current device ID.
|
| |
| int | nrf_cloud_client_id_runtime_set (const char *const client_id) |
| | Set the device ID at runtime. Requires.
|
| |
| int | nrf_cloud_tenant_id_get (char *id_buf, size_t id_len) |
| | Retrieve the current customer tenant ID.
|
| |
| int | nrf_cloud_jwt_generate (uint32_t time_valid_s, char *const jwt_buf, size_t jwt_buf_sz) |
| | Generate a JWT to be used with nRF Cloud's REST API. This library's configured values for client id and sec tag (NRF_CLOUD_SEC_TAG) will be used for generating the JWT.
|
| |
| int | nrf_cloud_pending_fota_job_process (struct nrf_cloud_settings_fota_job *const job, bool *const reboot_required) |
| | Process/validate a pending FOTA update job. Typically the job information is read from non-volatile storage on startup. This function is intended to be used by custom REST-based FOTA implementations. It is called internally if.
|
| |
| int | nrf_cloud_bootloader_fota_slot_set (struct nrf_cloud_settings_fota_job *const job) |
| | Set the active bootloader (B1) slot flag which is needed to validate a bootloader FOTA update. For proper functionality,.
|
| |
| int | nrf_cloud_fota_pending_job_type_get (enum nrf_cloud_fota_type *const pending_fota_type) |
| | Retrieve the FOTA type of a pending FOTA job. A value of NRF_CLOUD_FOTA_TYPE__INVALID indicates that there are no pending FOTA jobs. Depends on.
|
| |
| int | nrf_cloud_fota_pending_job_validate (enum nrf_cloud_fota_type *const fota_type_out) |
| | Validate a pending FOTA installation before initializing this library. This function enables the application to control the reboot/reinit process during FOTA updates. If this function is not called directly by the application, it will be called internally when nrf_cloud_init is executed. For pending NRF_CLOUD_FOTA_MODEM_DELTA jobs the modem library must be initialized before calling this function, otherwise the job will be marked as completed without validation. Depends on.
|
| |
| int | nrf_cloud_fota_fmfu_dev_set (const struct dfu_target_fmfu_fdev *const fmfu_dev_inf) |
| | Set the flash device used for full modem FOTA updates. This function is intended to be used by custom REST-based FOTA implementations. It is called internally when nrf_cloud_init is executed if.
|
| |
| int | nrf_cloud_fota_fmfu_apply (void) |
| | Install a full modem update from flash. If successful, reboot the device or reinit the modem to complete the update. This function is intended to be used by custom REST-based FOTA implementations. If.
|
| |
| bool | nrf_cloud_fota_is_type_modem (const enum nrf_cloud_fota_type type) |
| | Determine if FOTA type is modem related.
|
| |
| bool | nrf_cloud_fota_is_type_enabled (const enum nrf_cloud_fota_type type) |
| | Determine if the specified FOTA type is enabled by the configuration. This function returns false if both.
|
| |
| int | nrf_cloud_fota_job_start (void) |
| | Start the FOTA update job. This function should be called after the NRF_CLOUD_EVT_FOTA_JOB_AVAILABLE event is received. This function should only be called if.
|
| |
| int | nrf_cloud_credentials_check (struct nrf_cloud_credentials_status *const cs) |
| | Check if credentials exist in the configured location.
|
| |
| int | nrf_cloud_credentials_configured_check (void) |
| | Check if the credentials required for connecting to nRF Cloud exist. The application's configuration is used to determine which credentials are required.
|
| |
| void | nrf_cloud_sec_tag_set (const sec_tag_t sec_tag) |
| | Set the sec tag used for nRF Cloud credentials. The default sec tag value is.
|
| |
| sec_tag_t | nrf_cloud_sec_tag_get (void) |
| | Get the sec tag used for nRF Cloud credentials.
|
| |
1.9.6