14#ifndef ZEPHYR_INCLUDE_USBD_H_
15#define ZEPHYR_INCLUDE_USBD_H_
48#define USB_BSTRING_LENGTH(s) (sizeof(s) * 2 - 2)
60#define USB_STRING_DESCRIPTOR_LENGTH(s) (sizeof(s) * 2)
65enum usbd_str_desc_utype {
67 USBD_DUT_STRING_MANUFACTURER,
68 USBD_DUT_STRING_PRODUCT,
69 USBD_DUT_STRING_SERIAL_NUMBER,
70 USBD_DUT_STRING_INTERFACE,
73enum usbd_bos_desc_utype {
85 enum usbd_str_desc_utype
utype : 8;
97 enum usbd_bos_desc_utype
utype : 8;
139#define USBD_NUMOF_INTERFACES_MAX 16U
260#define USBD_CCTX_REGISTERED 0
279 const struct net_buf *
const buf);
340struct usbd_class_node {
391#define USBD_DEVICE_DEFINE(device_name, uhc_dev, vid, pid) \
392 static struct usb_device_descriptor \
393 fs_desc_##device_name = { \
394 .bLength = sizeof(struct usb_device_descriptor), \
395 .bDescriptorType = USB_DESC_DEVICE, \
396 .bcdUSB = sys_cpu_to_le16(USB_SRN_2_0), \
397 .bDeviceClass = USB_BCC_MISCELLANEOUS, \
398 .bDeviceSubClass = 2, \
399 .bDeviceProtocol = 1, \
400 .bMaxPacketSize0 = USB_CONTROL_EP_MPS, \
403 .bcdDevice = sys_cpu_to_le16(USB_BCD_DRN), \
404 .iManufacturer = 0, \
406 .iSerialNumber = 0, \
407 .bNumConfigurations = 0, \
409 static struct usb_device_descriptor \
410 hs_desc_##device_name = { \
411 .bLength = sizeof(struct usb_device_descriptor), \
412 .bDescriptorType = USB_DESC_DEVICE, \
413 .bcdUSB = sys_cpu_to_le16(USB_SRN_2_0), \
414 .bDeviceClass = USB_BCC_MISCELLANEOUS, \
415 .bDeviceSubClass = 2, \
416 .bDeviceProtocol = 1, \
417 .bMaxPacketSize0 = 64, \
420 .bcdDevice = sys_cpu_to_le16(USB_BCD_DRN), \
421 .iManufacturer = 0, \
423 .iSerialNumber = 0, \
424 .bNumConfigurations = 0, \
426 static STRUCT_SECTION_ITERABLE(usbd_context, device_name) = { \
427 .name = STRINGIFY(device_name), \
429 .fs_desc = &fs_desc_##device_name, \
430 .hs_desc = &hs_desc_##device_name, \
433#define USBD_CONFIGURATION_DEFINE(name, attrib, power) \
434 static struct usb_cfg_descriptor \
435 cfg_desc_##name = { \
436 .bLength = sizeof(struct usb_cfg_descriptor), \
437 .bDescriptorType = USB_DESC_CONFIGURATION, \
439 .bNumInterfaces = 0, \
440 .bConfigurationValue = 1, \
441 .iConfiguration = 0, \
442 .bmAttributes = USB_SCD_RESERVED | (attrib), \
443 .bMaxPower = (power), \
445 BUILD_ASSERT((power) < 256, "Too much power"); \
446 static struct usbd_config_node name = { \
447 .desc = &cfg_desc_##name, \
463#define USBD_DESC_LANG_DEFINE(name) \
464 static uint16_t langid_##name = sys_cpu_to_le16(0x0409); \
465 static struct usbd_desc_node name = { \
466 .bLength = sizeof(struct usb_string_descriptor), \
467 .bDescriptorType = USB_DESC_STRING, \
470 .utype = USBD_DUT_STRING_LANG, \
472 .ptr = &langid_##name, \
486#define USBD_DESC_STRING_DEFINE(d_name, d_string, d_utype) \
487 static uint8_t ascii_##d_name[USB_BSTRING_LENGTH(d_string)] = d_string; \
488 static struct usbd_desc_node d_name = { \
493 .bLength = USB_STRING_DESCRIPTOR_LENGTH(d_string), \
494 .bDescriptorType = USB_DESC_STRING, \
495 .ptr = &ascii_##d_name, \
509#define USBD_DESC_MANUFACTURER_DEFINE(d_name, d_string) \
510 USBD_DESC_STRING_DEFINE(d_name, d_string, USBD_DUT_STRING_MANUFACTURER)
523#define USBD_DESC_PRODUCT_DEFINE(d_name, d_string) \
524 USBD_DESC_STRING_DEFINE(d_name, d_string, USBD_DUT_STRING_PRODUCT)
536#define USBD_DESC_SERIAL_NUMBER_DEFINE(d_name) \
537 static struct usbd_desc_node d_name = { \
539 .utype = USBD_DUT_STRING_SERIAL_NUMBER, \
541 .use_hwinfo = true, \
543 .bDescriptorType = USB_DESC_STRING, \
556#define USBD_DESC_BOS_DEFINE(name, len, subset) \
557 static struct usbd_desc_node name = { \
559 .utype = USBD_DUT_BOS_NONE, \
563 .bDescriptorType = USB_DESC_BOS, \
566#define USBD_DEFINE_CLASS(class_name, class_api, class_priv, class_v_reqs) \
567 static struct usbd_class_data class_name = { \
568 .name = STRINGIFY(class_name), \
570 .v_reqs = class_v_reqs, \
571 .priv = class_priv, \
573 static STRUCT_SECTION_ITERABLE_ALTERNATE( \
574 usbd_class_fs, usbd_class_node, class_name##_fs) = { \
575 .c_data = &class_name, \
577 static STRUCT_SECTION_ITERABLE_ALTERNATE( \
578 usbd_class_hs, usbd_class_node, class_name##_hs) = { \
579 .c_data = &class_name, \
587#define VENDOR_REQ_DEFINE(_reqs, _len) \
589 .reqs = (const uint8_t *)(_reqs), \
597#define USBD_VENDOR_REQ(_reqs...) \
598 VENDOR_REQ_DEFINE(((uint8_t []) { _reqs }), \
599 sizeof((uint8_t []) { _reqs }))
936 const uint8_t cfg,
const bool enable);
950 const uint8_t cfg,
const bool enable);
long atomic_t
Definition: atomic_types.h:15
struct _dnode sys_dnode_t
Doubly-linked list node structure.
Definition: dlist.h:54
struct _dnode sys_dlist_t
Doubly-linked list structure.
Definition: dlist.h:50
struct _slist sys_slist_t
Single-linked list structure.
Definition: slist.h:49
struct _snode sys_snode_t
Single-linked list node structure.
Definition: slist.h:39
int usbd_ep_clear_halt(struct usbd_context *uds_ctx, uint8_t ep)
Clear endpoint halt.
int usbd_device_set_vid(struct usbd_context *const uds_ctx, const uint16_t vid)
Set USB device descriptor value idVendor.
int usbd_ep_dequeue(struct usbd_context *uds_ctx, const uint8_t ep)
Remove all USB device controller requests from endpoint queue.
int usbd_ep_set_halt(struct usbd_context *uds_ctx, uint8_t ep)
Halt endpoint.
int usbd_enable(struct usbd_context *uds_ctx)
Enable the USB device support and registered class instances.
int usbd_unregister_class(struct usbd_context *uds_ctx, const char *name, const enum usbd_speed speed, uint8_t cfg)
Unregister an USB class instance.
int usbd_config_attrib_rwup(struct usbd_context *const uds_ctx, const enum usbd_speed speed, const uint8_t cfg, const bool enable)
Setup USB device configuration attribute Remote Wakeup.
void(* usbd_msg_cb_t)(struct usbd_context *const ctx, const struct usbd_msg *const msg)
Callback type definition for USB device message delivery.
Definition: usbd.h:215
static void * usbd_class_get_private(const struct usbd_class_data *const c_data)
Get class implementation private data.
Definition: usbd.h:386
int usbd_msg_register_cb(struct usbd_context *const uds_ctx, const usbd_msg_cb_t cb)
Register USB notification message callback.
usbd_speed
USB device speed.
Definition: usbd.h:177
void usbd_remove_descriptor(struct usbd_desc_node *const desc_nd)
Remove USB string descriptor.
int usbd_add_descriptor(struct usbd_context *uds_ctx, struct usbd_desc_node *dn)
Add common USB descriptor.
int usbd_wakeup_request(struct usbd_context *uds_ctx)
Initiate the USB remote wakeup (TBD)
int usbd_shutdown(struct usbd_context *const uds_ctx)
Shutdown the USB device support.
int usbd_device_set_pid(struct usbd_context *const uds_ctx, const uint16_t pid)
Set USB device descriptor value idProduct.
int usbd_register_class(struct usbd_context *uds_ctx, const char *name, const enum usbd_speed speed, uint8_t cfg)
Register an USB class instance.
int usbd_config_maxpower(struct usbd_context *const uds_ctx, const enum usbd_speed speed, const uint8_t cfg, const uint8_t power)
Setup USB device configuration power consumption.
bool usbd_can_detect_vbus(struct usbd_context *const uds_ctx)
Check that the controller can detect the VBUS state change.
int usbd_add_configuration(struct usbd_context *uds_ctx, const enum usbd_speed speed, struct usbd_config_node *cd)
Add a USB device configuration.
bool usbd_is_suspended(struct usbd_context *uds_ctx)
Checks whether the USB device controller is suspended.
struct net_buf * usbd_ep_buf_alloc(const struct usbd_class_data *const c_data, const uint8_t ep, const size_t size)
Allocate buffer for USB device request.
int usbd_init(struct usbd_context *uds_ctx)
Initialize USB device.
int usbd_device_set_code_triple(struct usbd_context *const uds_ctx, const enum usbd_speed speed, const uint8_t base_class, const uint8_t subclass, const uint8_t protocol)
Set USB device descriptor code triple Base Class, SubClass, and Protocol.
int usbd_ep_buf_free(struct usbd_context *uds_ctx, struct net_buf *buf)
Free USB device request buffer.
int usbd_config_attrib_self(struct usbd_context *const uds_ctx, const enum usbd_speed speed, const uint8_t cfg, const bool enable)
Setup USB device configuration attribute Self-powered.
bool usbd_ep_is_halted(struct usbd_context *uds_ctx, uint8_t ep)
Checks whether the endpoint is halted.
usbd_ch9_state
USB device support middle layer runtime state.
Definition: usbd.h:147
int usbd_ep_ctrl_enqueue(struct usbd_context *const uds_ctx, struct net_buf *const buf)
Queue USB device control request.
int usbd_disable(struct usbd_context *uds_ctx)
Disable the USB device support.
enum usbd_speed usbd_caps_speed(const struct usbd_context *const uds_ctx)
Get highest speed supported by the controller.
int usbd_ep_enqueue(const struct usbd_class_data *const c_data, struct net_buf *const buf)
Queue USB device request.
uint8_t usbd_str_desc_get_idx(const struct usbd_desc_node *const desc_nd)
Get USB string descriptor index from descriptor node.
int usbd_device_set_bcd(struct usbd_context *const uds_ctx, const enum usbd_speed speed, const uint16_t bcd)
Set USB device descriptor value bcdUSB.
enum usbd_speed usbd_bus_speed(const struct usbd_context *const uds_ctx)
Get actual device speed.
#define USBD_NUMOF_INTERFACES_MAX
Definition: usbd.h:139
static struct usbd_context * usbd_class_get_ctx(const struct usbd_class_data *const c_data)
Get the USB device runtime context under which the class is registered.
Definition: usbd.h:371
@ USBD_SPEED_SS
Device supports or is connected to a super speed bus.
Definition: usbd.h:183
@ USBD_SPEED_FS
Device supports or is connected to a full speed bus.
Definition: usbd.h:179
@ USBD_SPEED_HS
Device supports or is connected to a high speed bus
Definition: usbd.h:181
@ USBD_STATE_CONFIGURED
Definition: usbd.h:150
@ USBD_STATE_DEFAULT
Definition: usbd.h:148
@ USBD_STATE_ADDRESS
Definition: usbd.h:149
state
Definition: parser_state.h:29
__UINT32_TYPE__ uint32_t
Definition: stdint.h:90
__UINT8_TYPE__ uint8_t
Definition: stdint.h:88
__UINT16_TYPE__ uint16_t
Definition: stdint.h:89
Runtime device structure (in ROM) per driver instance.
Definition: device.h:399
Mutex Structure.
Definition: kernel.h:2914
Network buffer representation.
Definition: buf.h:1004
uint16_t size
Amount of data that this buffer can store.
Definition: buf.h:1036
USB Setup Data packet defined in spec.
Definition: usb_ch9.h:40
USBD BOS Device Capability descriptor data.
Definition: usbd.h:95
enum usbd_bos_desc_utype utype
Descriptor usage type (not bDescriptorType)
Definition: usbd.h:97
Vendor Requests Table.
Definition: usbd.h:252
const uint8_t * reqs
Array of vendor requests supported by the class.
Definition: usbd.h:254
uint8_t len
Length of the array.
Definition: usbd.h:256
USB device support middle layer runtime data.
Definition: usbd.h:157
int ctrl_type
Control type, internally used for stage verification.
Definition: usbd.h:161
uint8_t configuration
USB device stack selected configuration.
Definition: usbd.h:167
uint32_t ep_halt
Halted endpoints bitmap.
Definition: usbd.h:165
bool post_status
Post status stage work required, e.g.
Definition: usbd.h:169
enum usbd_ch9_state state
Protocol state of the USB device stack.
Definition: usbd.h:163
struct usb_setup_packet setup
Setup packet, up-to-date for the respective control request.
Definition: usbd.h:159
uint8_t alternate[16U]
Array to track interfaces alternate settings.
Definition: usbd.h:171
USB device support class instance API.
Definition: usbd.h:267
void(* feature_halt)(struct usbd_class_data *const c_data, uint8_t ep, bool halted)
Feature halt state update handler.
Definition: usbd.h:269
void(* update)(struct usbd_class_data *const c_data, uint8_t iface, uint8_t alternate)
Configuration update handler.
Definition: usbd.h:273
void(* sof)(struct usbd_class_data *const c_data)
Start of Frame.
Definition: usbd.h:297
void(* suspended)(struct usbd_class_data *const c_data)
USB power management handler suspended.
Definition: usbd.h:291
void(* shutdown)(struct usbd_class_data *const c_data)
Shutdown of the class implementation.
Definition: usbd.h:309
int(* request)(struct usbd_class_data *const c_data, struct net_buf *buf, int err)
Endpoint request completion event handler.
Definition: usbd.h:287
int(* init)(struct usbd_class_data *const c_data)
Initialization of the class implementation.
Definition: usbd.h:306
int(* control_to_dev)(struct usbd_class_data *const c_data, const struct usb_setup_packet *const setup, const struct net_buf *const buf)
USB control request handler to device.
Definition: usbd.h:277
void(* enable)(struct usbd_class_data *const c_data)
Class associated configuration is selected.
Definition: usbd.h:300
int(* control_to_host)(struct usbd_class_data *const c_data, const struct usb_setup_packet *const setup, struct net_buf *const buf)
USB control request handler to host.
Definition: usbd.h:282
void(* resumed)(struct usbd_class_data *const c_data)
USB power management handler resumed.
Definition: usbd.h:294
void(* disable)(struct usbd_class_data *const c_data)
Class associated configuration is disabled.
Definition: usbd.h:303
USB device support class data.
Definition: usbd.h:319
void * priv
Pointer to private data.
Definition: usbd.h:329
struct usbd_context * uds_ctx
Pointer to USB device stack context structure.
Definition: usbd.h:323
const struct usbd_cctx_vendor_req * v_reqs
Supported vendor request table, can be NULL.
Definition: usbd.h:327
const struct usbd_class_api * api
Pointer to device support class API.
Definition: usbd.h:325
const char * name
Name of the USB device class instance.
Definition: usbd.h:321
Device configuration node.
Definition: usbd.h:129
sys_snode_t node
slist node struct
Definition: usbd.h:131
sys_slist_t class_list
List of registered classes (functions)
Definition: usbd.h:135
void * desc
Pointer to configuration descriptor.
Definition: usbd.h:133
USB device support runtime context.
Definition: usbd.h:224
void * fs_desc
Pointer to Full-Speed device descriptor.
Definition: usbd.h:244
void * hs_desc
Pointer to High-Speed device descriptor.
Definition: usbd.h:246
usbd_msg_cb_t msg_cb
Notification message recipient callback.
Definition: usbd.h:232
struct usbd_status status
Status of the USB device support.
Definition: usbd.h:242
sys_slist_t hs_configs
slist to manage High-Speed device configurations
Definition: usbd.h:240
struct usbd_ch9_data ch9_data
Middle layer runtime data.
Definition: usbd.h:234
const struct device * dev
Pointer to UDC device.
Definition: usbd.h:230
sys_slist_t fs_configs
slist to manage Full-Speed device configurations
Definition: usbd.h:238
struct k_mutex mutex
Access mutex.
Definition: usbd.h:228
const char * name
Name of the USB device.
Definition: usbd.h:226
sys_dlist_t descriptors
slist to manage descriptors like string, BOS
Definition: usbd.h:236
Descriptor node.
Definition: usbd.h:106
uint8_t bDescriptorType
Descriptor type.
Definition: usbd.h:118
sys_dnode_t node
slist node struct
Definition: usbd.h:108
const void *const ptr
Opaque pointer to a descriptor payload.
Definition: usbd.h:114
uint8_t bLength
Descriptor size in bytes.
Definition: usbd.h:116
struct usbd_str_desc_data str
Definition: usbd.h:110
struct usbd_bos_desc_data bos
Definition: usbd.h:111
USB device message.
Definition: usbd_msg.h:74
USB device support status.
Definition: usbd.h:189
unsigned int rwup
USB remote wake-up feature is enabled.
Definition: usbd.h:197
unsigned int enabled
USB device support is enabled.
Definition: usbd.h:193
enum usbd_speed speed
USB device speed.
Definition: usbd.h:199
unsigned int initialized
USB device support is initialized.
Definition: usbd.h:191
unsigned int suspended
USB device is suspended.
Definition: usbd.h:195
Used internally to keep descriptors in order.
Definition: usbd.h:81
uint8_t idx
Descriptor index, required for string descriptors.
Definition: usbd.h:83
enum usbd_str_desc_utype utype
Descriptor usage type (not bDescriptorType)
Definition: usbd.h:85
unsigned int use_hwinfo
Device stack obtains SerialNumber using the HWINFO API.
Definition: usbd.h:89
unsigned int ascii7
The string descriptor is in ASCII7 format.
Definition: usbd.h:87
USB Chapter 9 structures and definitions.
USB support message types and structure.