ina226.h

Go to the documentation of this file.

/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */
 
#ifndef ZEPHYR_INCLUDE_DT_BINDINGS_INA226_H_
#define ZEPHYR_INCLUDE_DT_BINDINGS_INA226_H_
 
#include <zephyr/dt-bindings/dt-util.h>
 
/* Reset Mode. */
#define INA226_RST_NORMAL_OPERATION     0x00
#define INA226_RST_SYSTEM_RESET         0x01
 
/* Averaging Mode. */
#define INA226_AVG_MODE_1               0x00
#define INA226_AVG_MODE_4               0x01
#define INA226_AVG_MODE_16              0x02
#define INA226_AVG_MODE_64              0x03
#define INA226_AVG_MODE_128             0x04
#define INA226_AVG_MODE_256             0x05
#define INA226_AVG_MODE_512             0x06
#define INA226_AVG_MODE_1024            0x07
 
/* Conversion time for bus and shunt voltage in micro-seconds. */
#define INA226_CONV_TIME_140            0x00
#define INA226_CONV_TIME_204            0x01
#define INA226_CONV_TIME_332            0x02
#define INA226_CONV_TIME_588            0x03
#define INA226_CONV_TIME_1100           0x04
#define INA226_CONV_TIME_2116           0x05
#define INA226_CONV_TIME_4156           0x06
#define INA226_CONV_TIME_8244           0x07
 
/* Operating Mode. */
#define INA226_OPER_MODE_POWER_DOWN                     0x00
#define INA226_OPER_MODE_SHUNT_VOLTAGE_TRIG             0x01
#define INA226_OPER_MODE_BUS_VOLTAGE_TRIG               0x02
#define INA226_OPER_MODE_SHUNT_BUS_VOLTAGE_TRIG         0x03
#define INA226_OPER_MODE_SHUNT_VOLTAGE_CONT             0x05
#define INA226_OPER_MODE_BUS_VOLTAGE_CONT               0x06
#define INA226_OPER_MODE_SHUNT_BUS_VOLTAGE_CONT         0x07
 
#endif /* ZEPHYR_INCLUDE_DT_BINDINGS_INA226_H_ */