particle-gen3-header
Vendor: Generic or vendor-independent
Description
GPIO pins exposed on Particle Gen3 (Feather) headers.
The Particle Gen3 boards are compatible with the Adafruit Feather
"shields" but use a different orientation and pin numbering scheme.
With the board oriented with the micro USB at the top:
* A 12-pin header on the right. 9 pins on this header are exposed
by this binding
* A 16-pin header. 13 pins on this header are exposed by this
binding.
This binding provides a nexus mapping for 22 pins where parent pins
0 through 8 correspond to the pins on the 12-pin header, starting
from the bottom; and pins 9 through 21 correspond to pins on the
16-pin header, skipping the bottom pin then assigning 9 through 19,
skipping over GND, and replacing the lower 3V3 with pin 20. The
physical layout is depicted below.
21 RESETn
- 3V3
20 MODEn
- GND
19 ADC0 LiPo+ -
18 ADC1 ENABLE -
17 ADC2 VBUS -
16 ADC3 PWM1 8
15 ADC4 PWM0 7
14 SS PWM1 6
13 SCK PWM1 5
12 MOSI PWM1 4
11 MISO PWM3 3
10 RX PWM3 2
9 TX SCL 1
- n/c SDA 0
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “particle-gen3-header” compatible.
Name |
Type |
Details |
---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Power domain the device belongs to.
The device will be notified when the power domain it belongs to is either
suspended or resumed.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|