atmel,sam-pmc
Vendor: Atmel Corporation
Description
Atmel Power Management Controller (PMC)
The Power Management Controller (PMC) optimizes power consumption by
controlling all system and user peripheral clocks. The PMC enables/disables
the clock inputs to many of the peripherals and the processor.
To specify the clocks in a peripheral, the standard clocks property needs
to be used, e.g.:
uart: uart@xxx {
...
clocks = <&pmc PMC_TYPE_PERIPHERAL p-id>;
...
};
In this example the clock-type was defined as PMC_TYPE_PERIPHERAL and the
peripheral-id was defined as p-id. The p-id number should be consulted on
datasheet, usually it is available at Product Mapping figure.
NOTE: The predefined clock type cell is defined at
include/zephyr/drivers/clock_clontrol/atmel_sam_pmc.h header file.
The clock-type constants are:
PMC_TYPE_CORE
PMC_TYPE_SYSTEM
PMC_TYPE_PERIPHERAL
PMC_TYPE_GCK
PMC_TYPE_PROGRAMMABLE
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
from common clock binding; shall be set to 2. The first entry is the type
of the clock (core, system, peripheral or generated) and the second entry
it's the peripheral identification index as provided by the datasheet.
This property is required. Constant value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-pmc” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Power domain the device belongs to.
The device will be notified when the power domain it belongs to is either
suspended or resumed.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Do not initialize device automatically on boot. Device should be manually
initialized using device_init().
|
Specifier cell names
clock cells: clock-type, peripheral-id