BQ274XX Sensor Sample
Overview
This sample application retrieves all the fuel gauge parameters, - Voltage, in volts - Average current, in amps - Standby current, in amps - Maximum load current, in amps - Gauge temperature - State of charge measurement in percentage - Full Charge Capacity in mAh - Remaining Charge Capacity in mAh - Nominal Available Capacity in mAh - Full Available Capacity in mAh - Average power in mW - State of health measurement in percentage
from BQ274XX sensor and prints this information to the UART console.
Requirements
nrf9160_innblue22 board with BQ274XX sensor BQ274XX Sensor [1]
Building and Running
Build this sample using the following commands:
# From the root of the zephyr repository
west build -b nrf9160_innblue22 samples/sensor/bq274xx
west flash