CLOCK HAL

group nrf_clock_hal

Hardware access layer for managing the CLOCK peripheral.

This code can be used to manage low-frequency clock (LFCLK), high-frequency clock (HFCLK), high-frequency 192 MHz clock (HFCLK192M) and high-frequency audio clock (HFCLKAUDIO) settings.

Defines

NRF_CLOCK_HAS_CALIBRATION: Symbol indicating whether the Low Frequency Clock calibration is present.

NRF_CLOCK_HAS_CALIBRATION_TIMER: Symbol indicating whether the Low Frequency Clock calibration timer is present.

NRF_CLOCK_HAS_HFCLK192M: Symbol indicating whether the 192 MHz clock is present.

NRF_CLOCK_HAS_HFCLKAUDIO: Symbol indicating whether the Audio clock is present.

NRF_CLOCK_HAS_HFCLK_DIV: Symbol indicating whether the HFCLK frequency configuration is present.

NRF_CLOCK_HAS_LFCLK_ALWAYSRUN: Symbol indicating whether the ALWAYSRUN register is present for LFCLK.

NRF_CLOCK_HAS_HFCLK_ALWAYSRUN: Symbol indicating whether the ALWAYSRUN register is present for HFCLK.

NRF_CLOCK_HAS_HFCLKSRC: Symbol indicating whether the HFCLKSRC register is present.

NRF_CLOCK_HAS_PLL: Symbol indicating whether the PLL section is present.

NRF_CLOCK_HAS_XO: Symbol indicating whether XO registers are present.

NRF_CLOCK_HAS_LFCLK_TYPE: Symbol indicating whether the CLOCK type contains LFCLK subtype.

NRF_CLOCK_LFCLKRUN_STATUS_NotTriggered: Task LFCLKSTART/HFCLKSTART has not been triggered definiton.

NRF_CLOCK_LFCLKRUN_STATUS_Triggered: Task LFCLKSTART/HFCLKSTART has been triggered.

NRF_CLOCK_INTENSET_LFCLKSTARTED_Msk: Interrupt on LFCLKSTARTED event mask definition.

NRF_LFCLKSRCCOPY: LF clock SRCCOPY register definition.

NRF_LFCLKRUN: LF clock RUN register definition.

NRF_LFCLKSTAT: LF clock STAT register definition.

NRF_LFCLKSRC: LF clock SRC register definition.

NRF_LFCLKALWAYSRUN: LF clock ALWAYSRUN register definition.

NRF_CLOCK_LFCLKSRCCOPY_SRC_Msk: LF clock SRCCOPY status mask definition.

NRF_CLOCK_LFCLKSRCCOPY_SRC_Pos: LF clock SRCCOPY status position definition.

NRF_CLOCK_LFCLKRUN_STATUS_Msk: LF clock RUN status mask definition.

NRF_CLOCK_LFCLKRUN_STATUS_Pos: LF clock RUN status position definition.

NRF_CLOCK_LFCLKSTAT_SRC_Msk: LF clock STAT source mask definition.

NRF_CLOCK_LFCLKSTAT_SRC_Pos: LF clock STAT source position definition.

NRF_CLOCK_LFCLKSTAT_STATE_Msk: LF clock STAT state mask definition.

NRF_CLOCK_LFCLKSTAT_STATE_Pos: LF clock STAT state position definition.

NRF_CLOCK_LFCLKSTAT_ALWAYSRUNNING_Msk: LF clock STAT alwaysrunning position definition.

NRF_CLOCK_LFCLKSTAT_ALWAYSRUNNING_Pos: LF clock STAT alwaysrunning mask definition.

NRF_CLOCK_LFCLKALWAYSRUN_ALWAYSRUN_Msk: LF clock ALWAYSRUN position definition.

NRF_CLOCK_LFCLKALWAYSRUN_ALWAYSRUN_Pos: LF clock ALWAYSRUN mask definition.

NRF_CLOCK_INTENSET_HFCLKSTARTED_Msk: HF clock bit mask in interrupt register.

NRF_TASKS_HFCLKSTART: Task HF clock start definition.

NRF_TASKS_HFCLKSTOP: Task HF clock stop definition.

NRF_EVENTS_HFCLKSTARTED: Event HF clock startrd definition.

NRF_HFCLKRUN: HF clock RUN register definition.

NRF_HFCLKSTAT: HF clock STAT register definition.

NRF_CLOCK_HFCLKRUN_STATUS_Msk: HF clock RUN status mask definition.

NRF_CLOCK_HFCLKRUN_STATUS_Pos: HF clock RUN status position definition.

NRF_CLOCK_HFCLKSTAT_STATE_Msk: HF clock STAT state mask definition.

NRF_CLOCK_HFCLKSTAT_STATE_Pos: HF clock STAT state position definition.

Enums

enum nrf_clock_lfclk_t

Low-frequency clock sources.

Used by LFCLKSRC, LFCLKSTAT, and LFCLKSRCCOPY registers.

Values:

enumerator NRF_CLOCK_LFCLK_LFULP: Internal 32 kHz Ultra-low power oscillator.

enumerator NRF_CLOCK_LFCLK_RC: Internal 32 kHz RC oscillator.

enumerator NRF_CLOCK_LFCLK_XTAL: External 32 kHz crystal.

enumerator NRF_CLOCK_LFCLK_SYNTH: Internal 32 kHz synthesized from HFCLK system clock.

enumerator NRF_CLOCK_LFCLK_XTAL_LOW_SWING: External 32 kHz low swing signal. Used only with the LFCLKSRC register. For the others NRF_CLOCK_LFCLK_XTAL is returned for this setting.

enumerator NRF_CLOCK_LFCLK_XTAL_FULL_SWING: External 32 kHz full swing signal. Used only with the LFCLKSRC register. For the others NRF_CLOCK_LFCLK_XTAL is returned for this setting.

enum nrf_clock_hfclk_t

High-frequency clock sources.

Used by HFCLKSTAT and HFCLK192MSTAT registers.

Values:

enumerator NRF_CLOCK_HFCLK_HIGH_ACCURACY: External 16 MHz/32 MHz crystal oscillator.

enumerator NRF_CLOCK_HFCLK_LOW_ACCURACY: Internal 16 MHz RC oscillator.

enum nrf_clock_domain_t

Clock domains.

Values:

enumerator NRF_CLOCK_DOMAIN_LFCLK

enumerator NRF_CLOCK_DOMAIN_HFCLK

enumerator NRF_CLOCK_DOMAIN_HFCLK192M

enumerator NRF_CLOCK_DOMAIN_HFCLKAUDIO

enum nrf_clock_hfclk_div_t

High-frequency clock frequency configuration.

Used by HFCLKCTRL and HFCLK192MCTRL registers.

Values:

enumerator NRF_CLOCK_HFCLK_DIV_1: Divide HFCLK/HFCLK192M by 1

enumerator NRF_CLOCK_HFCLK_DIV_2: Divide HFCLK/HFCLK192M by 2

enumerator NRF_CLOCK_HFCLK_DIV_4: Divide HFCLK192M by 4

enum nrf_clock_start_task_status_t

Trigger status of task LFCLKSTART/HFCLKSTART.

Used by LFCLKRUN and HFCLKRUN registers.

Note

This enum is deprecated.

Values:

enumerator NRF_CLOCK_START_TASK_NOT_TRIGGERED: Task LFCLKSTART/HFCLKSTART has not been triggered definiton. Task LFCLKSTART/HFCLKSTART has not been triggered.

enumerator NRF_CLOCK_START_TASK_TRIGGERED: Task LFCLKSTART/HFCLKSTART has been triggered. Task LFCLKSTART/HFCLKSTART has been triggered.

enum nrf_clock_int_mask_t

Interrupts.

Values:

enumerator NRF_CLOCK_INT_HF_STARTED_MASK: HF clock bit mask in interrupt register. Interrupt on HFCLKSTARTED event.

enumerator NRF_CLOCK_INT_LF_STARTED_MASK: Interrupt on LFCLKSTARTED event mask definition. Interrupt on LFCLKSTARTED event.

enumerator NRFX_CLOCK_INT_PLL_STARTED_MASK: Interrupt on PLLSTARTED event.

enumerator NRF_CLOCK_INT_DONE_MASK: Interrupt on DONE event.

enumerator NRF_CLOCK_INT_CTTO_MASK: Interrupt on CTTO event.

enumerator NRF_CLOCK_INT_CTSTARTED_MASK: Interrupt on CTSTARTED event.

enumerator NRF_CLOCK_INT_CTSTOPPED_MASK: Interrupt on CTSTOPPED event. Interrupt on HFCLKAUDIOSTARTED event.

enumerator NRF_CLOCK_INT_HF192M_STARTED_MASK: Interrupt on HFCLK192MSTARTED event.

enum nrf_clock_task_t

Tasks.

The NRF_CLOCK_TASK_LFCLKSTOP task cannot be set when the low-frequency clock is not running. The NRF_CLOCK_TASK_HFCLKSTOP task cannot be set when the high-frequency clock is not running.

Values:

enumerator NRF_CLOCK_TASK_HFCLKSTART: Start HFCLK clock source.

enumerator NRF_CLOCK_TASK_HFCLKSTOP: Stop HFCLK clock source.

enumerator NRF_CLOCK_TASK_PLLSTART: Start PLL and keep it running, regardless of the automatic clock requests.

enumerator NRF_CLOCK_TASK_PLLSTOP: Stop PLL.

enumerator NRF_CLOCK_TASK_LFCLKSTART: Start LFCLK clock source.

enumerator NRF_CLOCK_TASK_LFCLKSTOP: Stop LFCLK clock source.

enumerator NRF_CLOCK_TASK_CAL: Start calibration of LFCLK RC oscillator.

enumerator NRF_CLOCK_TASK_CTSTART: Start calibration timer.

enumerator NRF_CLOCK_TASK_CTSTOP: Stop calibration timer. Start HFCLKAUDIO clock source.

enumerator NRF_CLOCK_TASK_HFCLKAUDIOSTOP: Stop HFCLKAUDIO clock source.

enumerator NRF_CLOCK_TASK_HFCLK192MSTART: Start HFCLK192M clock source.

enumerator NRF_CLOCK_TASK_HFCLK192MSTOP: Stop HFCLK192M clock source.

enum nrf_clock_event_t

Events.

Values:

enumerator NRF_CLOCK_EVENT_HFCLKSTARTED: HFCLK oscillator started.

enumerator NRF_CLOCK_EVENT_PLLSTARTED: PLL started.

enumerator NRF_CLOCK_EVENT_LFCLKSTARTED: LFCLK oscillator started.

enumerator NRF_CLOCK_EVENT_DONE: Calibration of LFCLK RC oscillator completed.

enumerator NRF_CLOCK_EVENT_CTTO: Calibration timer time-out.

enumerator NRF_CLOCK_EVENT_CTSTARTED: Calibration timer started.

enumerator NRF_CLOCK_EVENT_CTSTOPPED: Calibration timer stopped. HFCLKAUDIO oscillator started.

enumerator NRF_CLOCK_EVENT_HFCLK192MSTARTED: HFCLK192M oscillator started.

Functions

NRF_STATIC_INLINE void nrf_clock_int_enable(NRF_CLOCK_Type *p_reg, uint32_t mask)

Function for enabling the specified interrupt.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled.

NRF_STATIC_INLINE void nrf_clock_int_disable(NRF_CLOCK_Type *p_reg, uint32_t mask)

Function for disabling the specified interrupt.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled.

NRF_STATIC_INLINE uint32_t nrf_clock_int_enable_check(NRF_CLOCK_Type const *p_reg, uint32_t mask)

Function for checking if the specified interrupts are enabled.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.

Returns:

Mask of enabled interrupts.

NRF_STATIC_INLINE uint32_t nrf_clock_task_address_get(NRF_CLOCK_Type const *p_reg, nrf_clock_task_t task)

Function for retrieving the address of the specified task.

This function can be used by the PPI module.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] CLOCK Task.

Returns:

Address of the requested task register.

NRF_STATIC_INLINE void nrf_clock_task_trigger(NRF_CLOCK_Type *p_reg, nrf_clock_task_t task)

Function for setting the specified task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task to be activated.

NRF_STATIC_INLINE uint32_t nrf_clock_event_address_get(NRF_CLOCK_Type const *p_reg, nrf_clock_event_t event)

Function for retrieving the address of the specified event.

This function can be used by the PPI module.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] CLOCK Event.

Returns:

Address of the specified event register.

NRF_STATIC_INLINE void nrf_clock_event_clear(NRF_CLOCK_Type *p_reg, nrf_clock_event_t event)

Function for clearing the specified event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to clear.

NRF_STATIC_INLINE bool nrf_clock_event_check(NRF_CLOCK_Type const *p_reg, nrf_clock_event_t event)

Function for retrieving the state of the specified event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.

Return values:

true – The event has been generated.
false – The event has not been generated.

NRF_STATIC_INLINE bool nrf_clock_start_task_check(NRF_CLOCK_Type const *p_reg, nrf_clock_domain_t domain)

Function for retrieving the trigger status of the task START for given domain.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
domain – [in] Clock domain.

Return values:

false – The task START for the given domain has not been triggered.
true – The task START for the given domain has been triggered.

NRF_STATIC_INLINE bool nrf_clock_is_running(NRF_CLOCK_Type const *p_reg, nrf_clock_domain_t domain, void *p_clk_src)

Function for retrieving the state of the clock.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
domain – [in] Clock domain.
p_clk_src – [out] Pointer to clock source that is running. Set to NULL if not needed. Ignored for HFCLKAUDIO domain. Variable pointed by p_clk_src must be of either nrf_clock_lfclk_t type for LFCLK or nrf_clock_hfclk_t type for HFCLK and HFCLK192M.

Return values:

false – The clock is not running.
true – The clock is running.

NRF_STATIC_INLINE void nrf_clock_lf_src_set(NRF_CLOCK_Type *p_reg, nrf_clock_lfclk_t source)

Function for changing the low-frequency clock source.

Check in Product Specification if this function can be called when the low-frequency clock is running.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
source – [in] New low-frequency clock source.

NRF_STATIC_INLINE nrf_clock_lfclk_t nrf_clock_lf_src_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the selected source for the low-frequency clock.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_LFCLK_RC – The internal 32 kHz RC oscillator is the selected source for the low-frequency clock.
NRF_CLOCK_LFCLK_Xtal – An external 32 kHz crystal oscillator is the selected source for the low-frequency clock.
NRF_CLOCK_LFCLK_Synth – The internal 32 kHz synthesized from the HFCLK is the selected source for the low-frequency clock.

NRF_STATIC_INLINE nrf_clock_lfclk_t nrf_clock_lf_actv_src_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the active source of the low-frequency clock.

Note

This function is deprecated. Use nrf_clock_is_running instead.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_LFCLK_RC – The internal 32 kHz RC oscillator is the active source of the low-frequency clock.
NRF_CLOCK_LFCLK_Xtal – An external 32 kHz crystal oscillator is the active source of the low-frequency clock.
NRF_CLOCK_LFCLK_Synth – The internal 32 kHz synthesized from the HFCLK is the active source of the low-frequency clock.

NRF_STATIC_INLINE nrf_clock_lfclk_t nrf_clock_lf_srccopy_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the clock source for the LFCLK clock when the task LKCLKSTART is triggered.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_LFCLK_RC – The internal 32 kHz RC oscillator is running and generating the LFCLK clock.
NRF_CLOCK_LFCLK_Xtal – An external 32 kHz crystal oscillator is running and generating the LFCLK clock.
NRF_CLOCK_LFCLK_Synth – The internal 32 kHz synthesized from the HFCLK is running and generating the LFCLK clock.

NRF_STATIC_INLINE bool nrf_clock_lf_is_running(NRF_CLOCK_Type const *p_reg)

Function for retrieving the state of the LFCLK clock.

Note

This function is deprecated. Use nrf_clock_is_running instead.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

false – The LFCLK clock is not running.
true – The LFCLK clock is running.

NRF_STATIC_INLINE nrf_clock_start_task_status_t nrf_clock_lf_start_task_status_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the trigger status of the task LFCLKSTART.

Note

This function is deprecated. Use nrf_clock_start_task_check instead.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_START_TASK_NOT_TRIGGERED – The task LFCLKSTART has not been triggered.
NRF_CLOCK_START_TASK_TRIGGERED – The task LFCLKSTART has been triggered.

NRF_STATIC_INLINE void nrf_clock_hf_src_set(NRF_CLOCK_Type *p_reg, nrf_clock_hfclk_t source)

Function for changing the high-frequency clock source.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
source – [in] New high-frequency clock source.

NRF_STATIC_INLINE nrf_clock_hfclk_t nrf_clock_hf_src_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the selected source of the high-frequency clock.

For SoCs not featuring the HFCLKSRC register, this is always also the active source of the high-frequency clock.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_HFCLK_LOW_ACCURACY – The internal RC oscillator is the selected source of the high-frequency clock.
NRF_CLOCK_HFCLK_HIGH_ACCURACY – An external crystal oscillator is the selected source of the high-frequency clock.

NRF_STATIC_INLINE bool nrf_clock_hf_is_running(NRF_CLOCK_Type const *p_reg, nrf_clock_hfclk_t clk_src)

Function for retrieving the state of the HFCLK clock.

Note

This function is deprecated. Use nrf_clock_is_running instead.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
clk_src – [in] Clock source to be checked.

Return values:

false – The HFCLK clock is not running.
true – The HFCLK clock is running.

NRF_STATIC_INLINE nrf_clock_start_task_status_t nrf_clock_hf_start_task_status_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the trigger status of the task HFCLKSTART.

Note

This function is deprecated. Use nrf_clock_start_task_check instead.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_START_TASK_NOT_TRIGGERED – The task HFCLKSTART has not been triggered.
NRF_CLOCK_START_TASK_TRIGGERED – The task HFCLKSTART has been triggered.

NRF_STATIC_INLINE void nrf_clock_hfclkaudio_config_set(NRF_CLOCK_Type *p_reg, uint16_t freq_value)

Function for changing the Audio clock FREQ_VALUE.

The frequency of HFCLKAUDIO ranges from 10.666 MHz to 13.333 MHz in 40.7 Hz steps. To calculate freq_value corresponding to the chosen frequency, use the following equation: FREQ_VALUE = 2^16 * ((12 * f_out / 32M) - 4)

Warning

Chosen frequency must fit in 11.176 MHz - 11.402 MHz or 12.165 MHz - 12.411 MHz frequency bands.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
freq_value – [in] New FREQ_VALUE

NRF_STATIC_INLINE uint16_t nrf_clock_hfclkaudio_config_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the Audio clock FREQ_VALUE.

The frequency of HFCLKAUDIO ranges from 10.666 MHz to 13.333 MHz in 40.7 Hz steps. To calculate frequency corresponding to the returned FREQ_VALUE, use the following equation: f_out = 32M * (4 + FREQ_VALUE * 2^(-16))/12

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns:

FREQ_VALUE of the Audio clock.

NRF_STATIC_INLINE void nrf_clock_cal_timer_timeout_set(NRF_CLOCK_Type *p_reg, uint32_t interval)

Function for changing the calibration timer interval.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
interval – [in] New calibration timer interval in 0.25 s resolution (range: 0.25 seconds to 31.75 seconds).

NRF_STATIC_INLINE void nrf_clock_hfclk192m_div_set(NRF_CLOCK_Type *p_reg, nrf_clock_hfclk_div_t divider)

Function for changing the HFCLK192M frequency divider.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
divider – [in] New HFCLK192M divider.

NRF_STATIC_INLINE nrf_clock_hfclk_div_t nrf_clock_hfclk192m_div_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the HFCLK192M frequency divider.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns:

HFCLK192M frequency divider.

NRF_STATIC_INLINE void nrf_clock_hfclk192m_src_set(NRF_CLOCK_Type *p_reg, nrf_clock_hfclk_t source)

Function for changing the HFCLK192M source.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
source – [in] New HFCLK192M source.

NRF_STATIC_INLINE nrf_clock_hfclk_t nrf_clock_hfclk192m_src_get(NRF_CLOCK_Type const *p_reg)

Function for retrieving the selected source of the HFCLK192M.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values:

NRF_CLOCK_HFCLK_LOW_ACCURACY – The internal RC oscillator is the selected source of the HFCLK192M.
NRF_CLOCK_HFCLK_HIGH_ACCURACY – An external crystal oscillator is the selected source of the HFCLK192M.

NRF_STATIC_INLINE void nrf_clock_alwaysrun_set(NRF_CLOCK_Type *p_reg, nrf_clock_domain_t domain, bool alwaysrun)

Function for setting the clock domain to always run.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
domain – [in] Clock domain.
alwaysrun – [in] Ensure the clock is always running.

NRF_STATIC_INLINE bool nrf_clock_alwaysrun_get(NRF_CLOCK_Type const *p_reg, nrf_clock_domain_t domain)

Function for checking if the clock domain is configured to always run.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
domain – [in] Clock domain.

Return values:

true – The clock domain is configured to always run.
false – The clock domain is not configured to always run.

NRF_STATIC_INLINE bool nrf_clock_alwaysrun_active_get(NRF_CLOCK_Type const *p_reg, nrf_clock_domain_t domain)

Function for checking if the clock domain always run setting is active.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
domain – [in] Clock domain.

Return values:

true – The clock domain always run setting is active.
false – The clock domain always run setting is not active.

NRF_STATIC_INLINE void nrf_clock_subscribe_set(NRF_CLOCK_Type *p_reg, nrf_clock_task_t task, uint8_t channel)

Function for setting the subscribe configuration for a given CLOCK task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to set the configuration.
channel – [in] Channel through which to subscribe events.

NRF_STATIC_INLINE void nrf_clock_subscribe_clear(NRF_CLOCK_Type *p_reg, nrf_clock_task_t task)

Function for clearing the subscribe configuration for a given CLOCK task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to clear the configuration.

NRF_STATIC_INLINE void nrf_clock_publish_set(NRF_CLOCK_Type *p_reg, nrf_clock_event_t event, uint8_t channel)

Function for setting the publish configuration for a given CLOCK event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to set the configuration.
channel – [in] Channel through which to publish the event.

NRF_STATIC_INLINE void nrf_clock_publish_clear(NRF_CLOCK_Type *p_reg, nrf_clock_event_t event)

Function for clearing the publish configuration for a given CLOCK event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to clear the configuration.